Imperial Custom Apparel DTF Premium PET Film, 100 Meter Roll

DTF PET transfer film, 100 meter rolls in 30, 33, 42 and 60 cm Imperial Custom Apparel DTF Supply PET film is a premium transfer film made for Epson i3200 based DTF printers. The anti static coating holds a full color pass and a dense white underbase without bleeding, releases cleanly from the adhesive powder, and transfers with a soft hand onto cotton, polyester and blends. Every roll is 100 meters, so one roll is a real production run, not a sample. $85 per roll in every type and width, in stock in Miami, Florida, no minimum order, tracked shipping worldwide. Pick the film type that matches how you print Single sided. Coated on the print side only. The everyday choice for most shops. Double sided. Coated on both sides for the flattest lay through the printer and the powder stage. Best for heavy fabrics and long runs. Instant peel (hot peel). Peel the backing right off the press while the garment is still hot. The fastest option for production lines. Cold peel. Let the garment cool before peeling. The cleanest edge on thin lines, small text and fine detail. Not sure which? Read DTF film types explained. Pick the width that fits your printer 30 cm for A3 printers 33 cm for A3 plus printers 42 cm for A2 printers 60 cm for A1 and wide format printers, and for gang sheet sellers Our DTF film width guide covers waste math and how many transfers a 100 m roll yields. What a good roll fixes Cheap film curls, builds static, jams the feed and sheds powder where there is no ink. Each of those turns into wasted ink, wasted powder and a reprint. This film lays flat, feeds clean and lifts in one piece. If you are fighting film that will not peel or prints that crack, the film is the first thing to check. Works with Imperial Custom Apparel DTF pigment ink, CMYK and white Imperial Custom Apparel hot melt adhesive powder Epson i3200 based DTF printers and most roll fed DTF printers Storage and handling Store rolls sealed, flat or on the spindle, away from heat and humidity. Let the roll reach room temperature before loading. Handle by the edges to keep the coating clean. Florida shops: read how humidity affects DTF film and powder. Questions shops ask Hot peel or cold peel? Hot peel for speed on production runs. Cold peel for the cleanest edge on fine detail. Many shops keep one roll of each. Single or double sided? Single sided for most work. Double sided when the film needs to lay perfectly flat on long runs or heavy fabrics. Which press settings? Start around 150 to 165 C for 10 to 15 seconds with medium pressure, then follow the peel instruction for your film type. Full matrix in DTF heat press settings. Ordering Choose a film type, a width and a quantity. No minimum order. Shops that go through film by the case can text (954) 280 0627 with monthly usage for bulk pricing. Final sale at wholesale pricing; anything that arrives damaged is replaced or refunded, just email photos the day it lands. Ships worldwide from Miami with USPS tracking and ultra fast shipping times. See all DTF supplies.