Nanolex Scrub (PPF & Wrap) 750ml

Paint Protection Film (PPF) and vinyl wraps require special care. Nanolex Scrub (PPF & Wrap) has been specifically developed for these surfaces to remove tough dirt and discoloration without damaging the delicate structure of the film. Removes baked-on insect remains & road film Gentle on PPF and glossy/matte films Ideal for clear PPF and tinted films Does not affect the film structure Attention: Nanolex Scrub (PPF & Wrap) does not remove scratches – it is not a polishing agent, but it may affect existing sealants, waxes, and coatings! Always test on an inconspicuous area first. Instructions for Use: Preparation: Clean the PPF or vinyl wrap with a pH-neutral shampoo or mild cleaner and dry it thoroughly. Application: Apply a small amount of Nanolex Scrub (PPF & Wrap) to a soft microfiber cloth or foam pad and work it over the affected area using light to medium pressure in straight-line movements to loosen any discoloration or dirt. Residue Removal: Wipe off with a damp microfiber cloth and allow to dry. Check: If necessary, repeat the process, but avoid excessive rubbing to prevent damage to the film. Nanolex Scrub (Wheel) – Maximum Cleaning Performance for Wheels Removes even the most stubborn dirt, yellowing, and baked-on brake dust. Wheels are exposed to extreme conditions – baked-on brake dust, road grime, and discoloration require intensive cleaning. Nanolex Scrub (Wheel) has been specifically designed to tackle these challenges, combining chemical cleaning power with mechanical deep-cleaning technology to restore wheels to their original condition. • Dissolves baked-on brake dust & metal particles • Removes yellowing & discoloration • Ideal for painted, polished, and anodized rims • Heavy-duty performance with maximum cleaning power Instructions for Use: 1. Preparation: • Clean the rims with a suitable rim cleaner (e.g., Nanolex Wheel Cleaner & Iron Remover). • Rinse thoroughly and dry. 2. Application: • Apply a small amount of Nanolex Scrub (Wheel) to a microfiber cloth, foam pad, or soft brush. • Work into the affected area using light to medium pressure in circular or straight-line motions. 3. Residue Removal: • Wipe off with a damp microfiber cloth or rinse with a pressure washer. 4. Check: • Repeat if necessary – older deposits may require multiple treatments.