Joolca HOTTAP Go | All-In-One Hot Shower Kit

Portable Hot Water System Hot water anywhere. No plumbing required. A fully self-contained portable hot water system with its own 12L tank, built-in pump, and gas burner. Fill it up, set your temperature, and press start. HOTTAP Go recirculates the water until it reaches your chosen temperature, then delivers every drop at that exact heat. 12L Built-in tank, roughly two showers 140°F Maximum water temperature 5 min Approximate pre-heat time Everything packs inside. The tank doubles as the carry case. Hose, showerhead, gas hose, and accessories store inside when you are done. Why it works better outside Built for real campsite use: quick setup, temperature-controlled recirculation, flexible water sourcing, and compact storage when the shower is over. Recirculating pre-heat Preheats the entire tank in under 5 minutes, then delivers every drop at the temperature you set, up to 60°C / 140°F. Proper shower feel The showerhead delivers a full, even spray at any flow rate. Turn it down to stretch your water and it still feels like a real shower. Control at the handle Turn it on, turn it off, and dial the flow from the showerhead without leaving the tent. One-touch operation Set your temperature, press Heat, and walk away. HOTTAP Go reaches your set temperature on its own in just a few minutes. Use almost any water source The built-in two-stage filter handles debris and fine particles. Fill from a creek, jerry can, or tank and it draws cleanly. Fast setup Quick-connect gas, water in, water out. Running hot in minutes without tools, plumbing, or a permanent power hookup. Jerry can sized A familiar form that fits naturally into most rigs. Many jerry can holders, brackets, and storage slots can take it straight out of the box. Magnetic mount The showerhead clips to almost any magnetic surface in seconds for hands-free showering at the right height. Windproof burner Automatic leeward venting helps keep the burner lit in strong winds, from exposed beaches to open campsites. Key Features Self-contained tank, pump, and burner in one portable unit 12L / 3.2 gal tank, roughly two showers Recirculates water to pre-heat before use Delivers every drop at your selected temperature Flow rate from 1.5 - 3.5 L/min / 0.4 - 0.9 gal/min Two-stage filtration for wild water sources Approximately 15 showers per 1 lb propane canister Everything stores inside the tank when packed away What’s Included HOTTAP Go unit with built-in tank and pump 50 cm / 19.7 in propane gas hose 3 m / 9.8 ft shower hose with adjustable-flow handle Magnetic showerhead clip 5 m / 16.4 ft cigarette socket 12V cable Specifications Core dimensions, power requirements, water capacity, propane usage, and flow details. General Tank Capacity 12L / 3.2 gal, roughly two showers Max Temperature 60°C / 140°F Pre-Heat Time Approximately 5 minutes Weight 9.5 kg / 20.9 lb without water Size 495 x 359 x 180 mm / 19.5 x 14.1 x 7.1 in Electrical Power Draw 45 watts Voltage 12V DC Power Cable Length 5 m / 16.4 ft cigarette socket cable Water & Flow Flow Rate 1.5 - 3.5 L/min / 0.4 - 0.9 gal/min Filtration Two-stage filtration Shower Hose Length 3 m / 9.8 ft Propane Gas Canister 0.45 kg / 1 lb propane canister Approximate Usage Heats up to 90L / 23.8 gal of water, or roughly 15 showers Gas Hose Length 50 cm / 19.7 in Gas Flow 20 MJ/hr / 18,956 BTU/hr