LiteOn 12V/7.5A 90W Power Adapter

Industrial Adapter 12V Series - PA-1900-88V This series is class 1, single-output AC to DC 90W green adapter with C6 inlet type. It can be operated from AC 90V~264V with good efficiency performance for various ITE, industrial and networking application. It also complies world-wide Safety and EMC regulations. Features Full AC input voltage design with C6 socket Withstand 300Vac surge voltage for 5 seconds Full Protections: Short-circuit/ Over-voltage/ Over-current/ Over temperature operating. Energy efficiency level VI compliance Slim and compact in size IEC/EN 62368-1 design compliance Up to 5000 meters operating altitude (note #4) Electrical Specification Model Name PA-1900-88V1 Output Rated power 90W Rated voltage 12V Rated current 7.5A Ripple & Noise(max.) (note #2) 200mV 480mV (burst mode, Io<2A) Line & load regulation ±5% Hold-up time(typ.) 10ms Timing: AC ON delay /rising (max.) 3 sec / 30ms Input Rated voltage range 100~240Vac Operated voltage range 90~264Vac, 300Vac for 5 sec Current range (max.) 1.5A/100Vac Inrush current No component damaged (<I²*t). Frequency range 50-60Hz Leakage current(max.) 0.25mA at 240Vac Average efficiency (min.) 89% Protection Function Over voltage (max.) 150% of rated voltage, latch-off protection. Over current (max.) 180% of rated current, latch-off protection. Short circuit at O/P No damage, latch-off protection. Over temperature No damage, latch-off protection. Others MTBF (min.) (note#3) 500K hours @ rated load Environment Temperature (note#5) (operating) -20~40℃ /(storage) -40~85℃ Humidity (operating) 10~90% RH non-condensing /(storage) 5~95% RH Altitude (max.) 5000 meters Mechanical Dimension 130.0(L)*66.0(W)*22(H) mm Vibration 10~500 Hz, 5G 20min./1cycle per axis for all axes(X, Y, Z) Weight (typ.) 285g Safety Standard CB/IEC62368-1,TUV62368-1,UL62368-1,EN62368-1, CCC GB4943.1,PSE J62368-1,KC60950-1 Withstand voltage Input-Output: 4242VDC / Input-FG: 2150VDC Isolation resistance(min.) Input-Output: 30Mohm @ 500VDC, 25℃, 70%RH EMC EN55032 (CISPR32) Conducted EMI: class B / Radiated EMI: class B FCC Conducted EMI: class B / Radiated EMI: class B EN61000-3-2 Harmonic distortion: Class D EN61000-4-2 ESD: ±8KV contact discharge / ±15KV contact discharge EN61000-4-3 Radiated RF immunity: 3V/m EN61000-4-4 EFT: ±1KV (AC port) EN61000-4-5 Surge: ±1KV DM / ±2KV CM EN61000-4-6 Conducted RF immunity: 3V/m EN61000-4-8 Magnetic field immunity: 3A/m EN61000-4-11 Voltage dip immunity Notes 1: All specification defined at 230Vac/50Hz, rated power and 25℃ ambient temperature if not mentioned specifically. 2: Ripple noise is measured with 0.47uF MLCC & 47uF low ESR capacitor. 3: Calculated by Telcordia SR332 at 25℃ ambient temperature. 4: When operating altitude is higher than 2000m, the environment temperature derating factor is 0.36℃/100m. 5: De-rating curve of ambient temperature: Resources Datasheet Download Package Includes 1x Power Adapter Note: Power cord is not included in the package.