Hypertherm Powermax85 SYNC Plasma Cutter

Hypertherm Powermax85 SYNC Plasma Cutter The Powermax85 SYNC® is a next-generation professional grade air plasma cutter that dramatically simplifies system operation for gouging and recommended cutting up to 25 mm (1″). Features automated system process set-up via advanced RFID-enabled SmartSYNC® torches and a revolutionary single-piece cartridge consumable that provides trackable utilization data. The Powermax85 SYNC maximizes productivity through reductions in downtime, optimized cut quality performance and streamlined consumable inventory management. Maximum productivity Finish jobs faster with cut speeds five times greater than oxyfuel on 12 mm (1/2”) mild steel Superior cut and gouge quality let you spend less time on grinding and edge preparation100% duty cycle maximizes your cutting time Multiple, easy-to-use torch styles let you tackle a wide variety of jobs using the same system Easy-to-use for cutting and gouging No need to change the air pressure – Smart Sense™ technology ensures that it is always correctly set SpringStart™ technology ensures consistent starting and a more reliable torch Drag cut at full output with a patented shield that reduces dross buildup for smoother cutting Lower operating costs Consumable life up to four times longer than other systems in this amperage range Electrode end-of-life detection protects the torch and workpiece from damage by automatically stopping power when the electrode is overused Built to handle tough jobs Hypertherm Certified™ reliability ensures peak performance even in the harshest environments Duramax HyAmp torches are designed for high-impact and heat resistance Options: Powermax 85 SYNC, 25' Torch - 600 V CSA power supply - 087183 Specifications Recommended Cut Capacity 25 mm (1″) at 500 mm/min (20 ipm) 32 mm (1-1/4″) at 250 mm/min (10 ipm) Severance (Hand Cutting) Cut Capacity 38 mm (1-1/2″) at 125 mm/min (5 ipm) Pierce 20 mm (3/4″) Gouge capacity Typical gouge Metal removal rate 8,2 kg (18.2 lbs.) per hour Groove profile 3,5 mm D x 6,6 mm W (0.14″ D x 0.26″ W) Input voltages (± 10%) 200–480 V, 1-PH, 50/60 Hz 200–600 V, 3-PH, 50/60 Hz Input current @ 12.2 kW 200/208/240/480 V, 1-PH 70/68/58/29 A 200/208/240/480/600 V, 3-PH 42/40/35/18/17 A Output current 25–85 A Rated output voltage 143 VDC Duty cycle @ 40° C (104° F) 100% @ 66 A, 230–600 V, 1/3-PH Open circuit voltage (OCV) 305 VDC Weight with 7,6 m (25′) torch 32 kg (67 lbs.) Dimensions with handles 483 mm D; 233 mm W; 430 mm H (19″ D; 9.2″ W; 17″ H) Gas supply Cutting: air (clean, dry, oil-free air), nitrogen Recommended gas inlet flow rate/pressure Cutting: 210 I/min @ 5.9 bar (450 scfh, 7.5 scfm @ 85 psi) Gouging: 210 I/min @ 4.8 bar (450 scfh, 7.5 scfm @ 70 psi) Input power cable length 3 m (10′) Power supply type Inverter – IGBT Engine drive requirement 20 kW or 25 kVa for full 85 A output Electrical efficiency 91.9% Recyclability 100% Warranty Power supply: 6-year, Torch: 1-year What's Included: 200-600 V CSA standard power supply 75° handheld torch w/consumables Work Lead 7.6m (25') lead and Ground Lead Product Manual