K. Light 1 Channel Kinetic Switch Receiver

The K. Light S11-K10R.1 1 Channel Kinetic Switch Receiver is designed to work with compatible K. Light kinetic switches, enabling wireless control of a single lighting circuit. Once paired with the switch, the receiver is installed at the light fitting and responds to the wireless signal generated by each switch press. Product Features Essential receiver for K. Light kinetic switches: Required to complete a kinetic switch setup. The switch sends the signal, and the receiver controls the connected light. 1-channel lighting control: Suitable for controlling one lighting circuit or one lighting zone. Wireless switching solution: Allows compatible kinetic switches to operate without a traditional wired connection between the switch position and the light point. Ideal for renovations and retrofits: A useful option when you want to add or move a switch without chasing walls or pulling new switch wires. Works with battery-free kinetic switches: K. Light’s kinetic switches generate energy from each press, sending a wireless signal to the receiver with no batteries required. Compact receiver design: The receiver is small enough for discreet installation near the fitting, depending on the electrical setup and available space. 433MHz RF signal: Product data lists the receiver as using a 433MHz RF wireless signal for communication with compatible kinetic switches. Supports LED and incandescent lighting loads: Up to 300W LED and 800W incandescent, making it suitable for many common lighting applications when installed within specification. Useful for additional switch points: Great for bedrooms, passages, staircases, hallways, lounges and offices where extra lighting control is needed No Wi-Fi required: The K. Light kinetic system uses a direct wireless receiver setup, not a Wi-Fi-based smart-home connection. What's in the Box 1 x 1 Channel Kinetic Switch Receiver Frequently Asked Questions Does the S11-K10R.1 receiver work on its own? No. It must be paired with a compatible K. Light kinetic switch. What does the receiver do? It receives the wireless signal from the kinetic switch and controls the connected light fitting. Is this for one light circuit? Yes. This is a 1-channel receiver, so it is intended for single lighting circuit control. Does the kinetic switch need batteries? No. K. Light’s kinetic switches generate power from each press and send a wireless signal to the receiver. Can it be used for LED lighting? Yes, provided the connected load stays within the listed rating. Where is the receiver installed? The receiver is installed within the light fitting after it is paired with the switch. Installation should be done by a qualified electrician. Technical Specifications Colour: White Wattage: LED's 300W max | Incandescent 800W max Voltage: 220V AC 50/60Hz Frequency Range: 433MHz Height: 22mm Width: 30mm Length: 55mm