Circle Crossbar for Backdrop Stand - Pipe and Drape (3m Diameter)

This listing is for the Circle Crossbar only. To function as a complete backdrop stand, it requires four compatible uprights and base plates, which are sold separately. You can purchase the individual components separately, or swap out the standard crossbars in 2 of our 3x3m Pipe and Drape Backdrop Stand Sets or 1 of the Cube Stand Set. Create a statement circular backdrop with our 3m Circle Crossbar. Ideal for ceremony backdrops, photo areas, entrance features and event installations, this large round crossbar can be styled with curtains, florals, balloons or layered fabric. The 3m diameter creates a bold focal point while also giving you plenty of room to build a full, decorative backdrop. Assembly Notes We recommend setting up the crossbar around the upright poles, so once assembled you can lift it straight into place without needing to move it. Add your curtains or draping panels to the crossbar before completing the circle, as it cannot be opened once assembled and raised into position. The poles are numbered for easy assembly. Simply connect #1 to #1, #2 to #2, and so on. You may need to apply light pressure to the opposite side to connect and lock the final piece. When assembling, keep the upright poles on the inside of the circle and pushed firmly against the crossbar for stability when raising and lowering. We recommend two to four people raise and lower the crossbar together. If using two people, raise the two adjacent poles on one side first, then move to the two adjacent poles on the other side. Work gradually and evenly, lifting each side a little at a time until the crossbar reaches the desired height. Recommended Draping Options To create a full look, we recommend pairing the 3m Circle Crossbar with the following draping options. The quantity needed may vary, depending on the fullness and overall look you would like to achieve: 16 x Lycra Backdrop Panels 4 x Chiffon Split Curtains (giving you 8 panels total) 12 x Ice Silk Backdrop Panels 4 of our 3x3m Backdrop Curtains (excluding our Velvet Backdrops as they are too heavy) When creating backdrop displays for weddings and events, we know every venue is different and flexibility is essential. This is why we also sell all components of our backdrop support sets individually, including baseplates, uprights, spigots, brackets and crossbars, allowing you to build larger or custom shaped installations as needed. Weight limit and safety notice: The baseplates will support the weight of the configuration. However, this setup can hold a maximum of 15kg only. Exceeding this limit may result in instability or damage. Always ensure weight is evenly distributed and do not overload the structure. Size: 3m wide diameter Weight: 3.8kgs Weight Capacity: 20kgs Assembly: Easy click system, no tools needed. READ BEFORE PURCHASING: Due to the nature of the manufacture and transport of this product it is to be expected there may be some minor cosmetic surface defects such as chipped/thin paint, surface imperfection mirror scratches.