Shark Jack Display

INTRODUCTION The original Shark Jack devices are powerful, portable network pentesting devices for rapid deployment of payloads. Easy payload updates, situation-aware adaptability and interactivity were skipped in order to optimise for simplicity and speed. The Shark Jack Display changes everything: still ultra-portable, still speed-optimised - but with the inclusion of an OLED display and rocker-switch - ethernet audits are now interactive. Interact with payloads in real-time and see live results on-screen. Scan a network, read the output, dig deeper - all on-device, no computer necessary. The Shark Jack Display natively runs Bash and interactive DuckyScript™: payloads can now request your input, branch on results and drive any Linux network tool. The device ships with preloaded payloads: over a dozen built-in payloads, and can automatically download new updates. Finally, sys-admins with two Shark Jacks can use SharkLink™ - to finally get a quick solution the age-old problem: easily tell if there's a route between two different ports. Real-time results on-screen A 1.2" OLED gives you real-time results and rapid configuration. Read scans live, on-device, with no laptop in sight. Interactive payloads Bash and interactive DuckyScript™ let you prompt, branch and drive Linux network tools on the fly. Powerful and Portable Built to survive on your keychain. Deploys in seconds - forget it until you need it. Training included Hours of Hak5-produced step-by-step learning videos and online quizzes. Effortlessly gain expertise. SEE IT IN ACTION Get hands on with the Shark Jack Display's creator, Hak5's Darren Kitchen. See how easy network audits become with interactive payloads, on-screen results, phone-based control via C2 cloud. GETTING STARTED: THE CRASH COURSE The Shark Jack Display ships with a complete training course: hours of video walking you from the first boot to crafting your own payloads. Work through it at your own pace - every module is below. 1. Unboxing & Setup Power on, LED indicators, battery and first boot - get your Shark Jack Display ready for action. 2. Operation Modes Arming Mode, Attack Mode and the NETMODE settings that decide how every payload behaves. 3. Firmware Update & Get Payloads Update firmware from the device itself and pull the latest community payloads - no computer necessary. 4. Interface Tour Navigate the on-device menus: Payloads, Tools, Settings and About. 5. Payload Execution Run your first payload, read the Payload Log live, and quit a running script safely. 6. Profiles Save, load and manage per-payload configurations with DuckyScript™ Payload Profiles. 7. Crafting Payloads Gain root over SSH and build your own payload from the shell. 8. SharkLink Deploy two Shark Jack Displays and verify exactly which network ports connect to which. UNDERSTAND THE SHARK JACK DISPLAY 1. OLED Display 1.2" high-contrast 128×64 OLED with a wide viewing angle - live payload output, on-device. 2. RGB-LED RJ45 Backlit RJ45 with RGB attack-mode and charge-status indication. Know its state at a glance. 3. USB-C Charging Charge from any USB source - including some smartphones - with onboard BMS and LED indicator. 1 2 3 4 5 6 4. Rocker Switch Tactile, single-finger navigation from a spring-loaded rocker switch and button combo. 5. Integrated Clip Anti-snag RJ45 cover protects the plug and doubles as a convenient keychain loop. 6. Serviceable Battery Serviceable 110 mAh LiPo on a JST connector - 30+ minutes of untethered runtime. HOW IT COMPARES There are three models in the SharkJack family - each one optimised for a specific environment: headless, tethered, or interactive. The Display adds an on-device screen and interactive payloads to the platform that made rapid physical-access network attacks routine. feedback Payload Feedback timer Deployment Time tune Arming Interface lan Attack Interface code Payload Language update Payload Updates database Loot Storage Shark Jack Display On-device RGB LED + OLED Display >30 Minute Battery + USB-C On Device Menus + SSH Fast Ethernet Bash + Interactive DuckyScript™ Automatic Local + Cloud C² Shark Jack Headless RGB LED 10-15 Minute Battery + USB-C SSH + Web Fast Ethernet Bash + DuckyScript™ Manual Local + Cloud C² Shark Jack Cable Inline RGB LED + Interactive Shell USB-C Only Interactive Serial + SSH + Web Fast Ethernet Bash + DuckyScript™ Automatic Local + Cloud C² Shark Jack Display On-device Payload Feedback RGB LED + OLED Display Deployment Time >30 Minute Battery + USB-C Arming Interface On Device Menus + SSH Attack Interface Fast Ethernet Payload Language Bash + Interactive DuckyScript™ Payload Updates Automatic Loot Storage Local + Cloud C² Shark Jack Headless Payload Feedback RGB LED Deployment Time 10-15 Minute Battery + USB-C Arming Interface SSH + Web Attack Interface Fast Ethernet Payload Language Bash + DuckyScript™ Payload Updates Manual Loot Storage Local + Cloud C² Shark Jack Cable Inline Payload Feedback RGB LED + Interactive Shell Deployment Time USB-C Only Arming Interface Interactive Serial + SSH + Web Attack Interface Fast Ethernet Payload Language Bash + DuckyScript™ Payload Updates Automatic Loot Storage Local + Cloud C² What's included 1x Shark Jack Display (Incognito Black) 1x USB-C charging cable Technical Specifications Display 1.2" high-contrast OLED, 128 x 64 pixel (119 PPI) Wide viewing angle Connectivity RGB-LED backlit RJ45 (attack-mode + charge-status indication) Fast Ethernet Interface Spring-loaded rocker switch / button combo (single-finger navigation) Power USB-C charging from any USB source, with BMS and LED indicator Serviceable 110 mAh LiPo battery (JST connector) 30+ minute runtime Physical Anti-snag RJ45 cover with integrated keychain loop Software Linux base Bash + interactive DuckyScript™ payloads Environmental Operating temperature: -20°C to 45°C Storage temperature: -20°C to 50°C Humidity: 0% to 90% relative humidity (non-condensing) Technical Resources Documentation & Support Product Documentation Software Downloads Product Guides Featured Payloads Development Tools Payload Hub (Community Payloads) Payload Studio Community Resources Hak5 Community Hak5 Forums Key Features 1.2" OLED for live, on-device results Interactive DuckyScript™ & Bash payloads Over a dozen built-in payloads SharkLink™ two-unit port verification Automatic on-device payload updates RGB-LED RJ45 (attack-mode + charge status) Standalone operation (no computer required) Root Linux access via SSH Serviceable battery Compatibility SSH access (on-device and over the network) Cloud C² loot storage Payload Studio USB-C charging from any USB source