Grease Monkey™ Nanner Peel Chemical Stripper 1 Gallon | Non-Toxic Aluminum Paint Stripper

When powder coating won't budge and paint clings to aluminum — Nanner Peel gets to work. Nanner Peel Chemical Stripper is a water-based, non-toxic, biodegradable paint remover engineered to safely strip powder coatings and paint from aluminum and other non-ferrous metals. Built for shops that need real stripping power without the harsh chemicals, harmful fumes, or environmental tradeoffs. Whether you're restoring wheels, prepping aluminum parts, or clearing old coatings off non-ferrous metal, this formula is designed to lift stubborn finishes cleanly, without damaging the base metal underneath. ⸻ Built for Aluminum & Non-Ferrous Metal Most strippers are too harsh for aluminum, or too weak to actually work. Nanner Peel is formulated to handle: powder coatings baked-on paint stubborn factory finishes coatings on non-ferrous metals Instead of risking your parts with aggressive, corrosive chemicals, this stripper lifts coatings safely so they can be rinsed away clean. ⸻ Where Nanner Peel Works Best Nanner Peel is ideal for shops working with aluminum and other sensitive metals. Perfect for: ✔ aluminum wheels and rims ✔ non-ferrous automotive parts ✔ powder-coated components ✔ restoration and fabrication shops ✔ professional strip tanks and heated baths Anywhere aluminum needs to be stripped without being damaged. ⸻ Safer Stripping, No Compromise The formula is engineered without methylene chloride, with low vapor pressure to reduce VOC emissions, and is fully biodegradable, so shops get real stripping performance without the harsh health and environmental risks of traditional strippers. That makes Nanner Peel a favorite for: professional shops restoration specialists fabrication facilities serious hobbyists who want pro-level results If the job means stripping aluminum or non-ferrous coatings, this stripper is ready for it. ⸻ Use It Your Way Nanner Peel gives users flexibility depending on the job. Undiluted For maximum strength on stubborn coatings. Diluted (up to 50%) For lighter jobs, while still delivering effective results. This allows users to adjust strength while making the product last longer. ⸻ Perfect for Strip Tank Setups For best results, use a heated strip tank maintained at 165–175°F (a drum heater is recommended for consistent heat), housed in a 55-gallon stainless steel (304 grade or better) or HDPE container with a removable, secure lid. Keep the tank covered when not in use to reduce evaporation. Submerge parts fully and allow a dwell time of around 20 minutes, adjusting for coating thickness and type. Rinse thoroughly with fresh water and a pressure washer once stripping is complete. ⸻ Key Benefits ✔ Strips powder coatings and paint from aluminum and non-ferrous metals ✔ No methylene chloride, safer for users and the environment ✔ Low vapor pressure reduces VOC emissions ✔ Eco-friendly and biodegradable ✔ Usable undiluted or diluted up to 50% ✔ Works well with select ferrous metals (use caution with magnesium alloys) ⸻ The Stripper Built for Aluminum Some jobs need more than a generic paint stripper. Nanner Peel delivers safe, effective stripping power for aluminum and non-ferrous metal, helping shops restore parts and prep surfaces without damaging what they're working on. ⸻ Important Use caution with magnesium alloys. Maintain proper bath temperature (165–175°F) for best results, keep the strip tank covered when not in use, and always rinse parts thoroughly with fresh water after stripping.