Festool IP D220-LHS 2 225-SW Soft Interface Pad for PLANEX

Festool IP D220-LHS 2 225-SW Soft Interface Pad – 578916 Gentler sanding for smoother drywall finishes. The Festool IP D220-LHS 2 225-SW Soft Interface Pad is specifically designed for the Festool PLANEX LHS 2 225 EQ(I) and LHS 2-M 225 EQ long-reach drywall sanders. Its cushioned construction helps reduce sanding pressure on soft compounds, minimizing unwanted marks, gouges and uneven surfaces during finishing work. Soft Cushioned Interface 225 mm / 8-1/2" For PLANEX LHS 2 Gentle Compound Sanding GRANAT & GRANAT Net Drywall Finishing Ideal for painters, drywall finishers and renovation professionals, this soft interface pad helps the sander glide more smoothly over delicate plaster and dispersion-based compounds. Designed for use with Festool GRANAT and GRANAT Net abrasives, it supports controlled surface preparation before priming and painting. Compatibility Notice: This pad is designed for the PLANEX LHS 2 225 EQ(I) and LHS 2-M 225 EQ. It is not compatible with the older PLANEX LHS 225 EQ or LHS-E 225 EQ. Key Features & Benefits Soft cushioned design: Reduces aggressive sanding pressure on delicate drywall and finishing compounds. Helps prevent surface defects: Reduces the risk of sanding marks, gouges and uneven finishes. Improved sanding control: The flexible interface helps the sander move smoothly across soft compound surfaces. Designed for PLANEX LHS 2: Engineered for the Festool LHS 2 225 EQ(I) and LHS 2-M 225 EQ long-reach drywall sanders. Optimized abrasive attachment: Hook-and-loop surface designed for use with compatible Festool GRANAT and GRANAT Net abrasives. Professional finishing results: Supports smooth, even surface preparation before decorating. Compatible Festool Sanders Compatible Models Festool PLANEX LHS 2 225 EQ(I) Festool PLANEX LHS 2-M 225 EQ Not Compatible With Festool PLANEX LHS 225 EQ Festool PLANEX LHS-E 225 EQ Important: Festool explicitly excludes the older LHS 225 EQ and LHS-E 225 EQ models. Confirm the exact model designation on your sander before ordering this accessory. Recommended Applications Festool specifically recommends this soft interface pad for sanding delicate compound materials. Soft drywall finishing compounds Plaster-based compounds Dispersion-based compounds Interior wall and ceiling finishing Drywall surface preparation Renovation and remodeling projects Preparation before priming and painting Why it matters: Soft compounds can be easily damaged by excessive sanding pressure. The cushioned interface helps reduce aggressive contact, supporting a more consistent finished surface. Technical Specifications Manufacturer Festool Model IP D220-LHS 2 225-SW Article Number 578916 Product Type Soft Interface Sanding Pad Diameter 225 mm / 8-1/2" Pad Type Soft / Cushioned Compatible Sanders PLANEX LHS 2 225 EQ(I), LHS 2-M 225 EQ Abrasive Compatibility Festool GRANAT and GRANAT Net Abrasive Attachment Hook-and-Loop Primary Application Soft Compound Sanding What's Included 1 × Festool IP D220-LHS 2 225-SW Soft Interface Pad (578916) Note: PLANEX sander, backing pad and sanding abrasives are not included. Installation & Usage Verify compatibility: Confirm your sander is a compatible PLANEX LHS 2 model. Disconnect the tool: Switch off and disconnect the sander from its power source before changing accessories. Install the interface: Fit the soft interface pad according to Festool's instructions. Attach the abrasive: Use a compatible GRANAT or GRANAT Net abrasive suited to the compound being sanded. Sand with control: Use appropriate pressure and technique to avoid over-sanding delicate compound surfaces. Inspect the finish: Check the surface before priming or painting. Usage Reminder: Follow the PLANEX operating manual for accessory installation and safe sanding procedures. Frequently Asked Questions What is the Festool 578916 interface pad used for? It is designed to cushion sanding pressure when working on soft drywall and finishing compounds with compatible PLANEX sanders. Which Festool PLANEX sanders are compatible? The PLANEX LHS 2 225 EQ(I) and PLANEX LHS 2-M 225 EQ. Does it fit the older PLANEX LHS 225 EQ? No. Festool explicitly states that this interface pad is not suitable for the LHS 225 EQ or LHS-E 225 EQ. What is the diameter of the pad? Festool specifies a diameter of 225 mm (8-1/2 inches). Why use a soft interface pad? The cushioned design reduces aggressive sanding pressure, helping minimize marks and gouges on delicate compounds. Which abrasives should I use? Festool designs this interface pad for use with GRANAT and GRANAT Net abrasives. Is this useful before painting? Yes. It is intended for drywall finishing and surface preparation, helping produce a smoother surface before priming and painting. Does it replace the sander's backing pad? No. This is an interface pad accessory designed for the compatible PLANEX sanding system. Does the product include sanding discs? No. Sanding abrasives are separate accessories. Manufacturer Information & Resources Manufacturer: Festool Product: IP D220-LHS 2 225-SW Manufacturer Part Number: 578916 View Official Festool Canada Product Information