Tremco SF108 Pressure Sensitive Acrylic Adhesive - Clear

One Adhesive for Vinyl & Rubber Flooring SF108 is a high-performance pressure sensitive acrylic adhesive for most rubber and vinyl floor coverings. It's designed for single stick bonding of rubber flooring, tiles and sheet to porous surfaces, and it also bonds PVC floor, wall and ceiling coverings. It's solvent-free and non-flammable, so it's cleaner and safer to use than traditional rubber floor covering adhesives. It meets existing low VOC requirements too. Why choose this adhesive? Solvent-free and non-flammable Cleaner and safer than traditional rubber floor covering adhesives Faster application and quicker installation Meets existing low VOC requirements Permanent tack Thermo-welding the same day with the dry bond method (PVC) Can be applied direct to clean impervious surfaces (PVC) Guaranteed no serration marks (PVC) Compatible with a wide range of vinyls, including the highly plasticised types EMICODE EC1 very low emission Ideal For: Rubber flooring, tiles and sheet (up to 3mm thick) on porous surfaces PVC and vinyl floor coverings PVC wall and ceiling cladding in positive pressure clean rooms What you get: 5 litre or 15 litre bucket Covers up to 35m² (5 litre) or 110m² (15 litre) on smooth-backed coverings, using a 1.5mm x 5mm notched trowel Where to use: Installation must comply with BS 8204, BS 8203 (Installation of Resilient Floor Coverings) or BS 5325 (Installation of Textile Floor Coverings), plus any supplementary specifications. Porous surfaces must be primed with CS150 Acrylic Primer first. Rubber flooring: SF108 is for rubber tiles or sheet up to 3mm thick. For anything thicker than 3mm, use SF600 or SF512 instead. Only use SF108 where the rubber flooring manufacturer approves it. If you're working over underfloor heating, it needs to be fully commissioned, then switched off 48 hours before and during installation. Bring it back on 48 hours after completion, gradually, following the commissioning schedule. Contact our technical team for a full specification.