Dual Battery Tray Only - Ford Super Duty, Next-Gen Ranger & Everest - Under Bonnet

Designed for the Ford Ranger Next-Gen, Ranger Super Duty and Ford Everest V6, this five-piece, laser-cut under-bonnet dual battery mounting system provides a strong, vehicle-specific foundation for building your own dual battery setup. This isn't the first under-bonnet dual battery mounting system built for these platforms, and that was never the goal. We let the early kits hit the market, looked at where additional support was needed, and used that knowledge to engineer a seriously solid under-bonnet battery mounting solution. Built around a five-piece, laser-cut metal mounting system, the battery tray, top mounting strap, support arm and additional brackets work together to distribute the battery's weight across multiple vehicle mounting points rather than relying on the tray alone. Designed to utilise existing factory mounting locations, the system installs without drilling or cutting into the vehicle. The mounting system has been tested and confirmed suitable for Invicta Xero 100Ah and 120Ah lithium batteries, as well as the iTechworld 160Ah under-bonnet lithium battery, subject to the vehicle's mounting configuration and maximum allowable battery weight. This product includes the metal mounting components and vehicle-specific mounting hardware ONLY. No battery, DC-DC charger, wiring, Anderson plugs or electrical components are included. It's the ideal option for customers wanting to build their own dual battery system using their preferred electrical components. Important Battery Weight Information Circular Mounting Holes – Maximum Battery Weight 15kg Earlier Ford Ranger Next-Gen vehicles with circular mounting holes cannot utilise the additional battery support bracket. These vehicles retain a maximum battery weight of 15kg. Hexagonal Mounting Holes – Maximum Battery Weight 20kg Ford Ranger Super Duty and applicable 2026-onwards Ranger Next-Gen vehicles with hexagonal mounting holes can utilise the supplied additional battery support bracket. With this support correctly installed, the maximum battery weight increases to 20kg. All mounting hardware for both configurations is supplied. Check your vehicle's mounting-hole shape before selecting a battery, as the additional support cannot be fitted to vehicles with circular mounting holes. Important: While the mounting system has been tested with the Invicta Xero 100Ah and 120Ah and iTechworld 160Ah under-bonnet lithium batteries, the selected battery must still comply with your vehicle's applicable weight restriction. Key Features Five-Piece Mounting System – Laser-cut metal components work together to distribute battery weight across multiple vehicle mounting points for a strong, supported installation. Tray Only Configuration – Includes the metalwork and mounting hardware, allowing you to build your own dual battery system with your preferred electrical components. Tested Battery Compatibility – Tested and confirmed suitable for Invicta Xero 100Ah and 120Ah lithium batteries and the iTechworld 160Ah under-bonnet lithium battery, subject to vehicle-specific weight limits. All Mounting Hardware Included – Supplied with mounting hardware for both circular and hexagonal mounting-hole configurations. Additional Battery Support – Includes an additional support bracket for compatible vehicles with hexagonal mounting holes, allowing a maximum battery weight of 20kg. Vehicle-Specific Weight Limits – Supports batteries up to 15kg on vehicles with circular mounting holes or 20kg on compatible vehicles with the additional support correctly installed. No Drilling or Cutting Required – Designed to bolt into existing factory mounting locations without permanent vehicle modifications. Integrated Charger Mounting Position – The upper battery mounting strap includes provisions for mounting a compatible REDARC DC-DC charger (charger not included). Durable Metal Construction – Laser-cut metalwork finished in textured black powder coat, with one structural bracket supplied raw. DIY Installation – Ideal for customers wanting to assemble and configure their own under-bonnet dual battery system. What's Included Top Battery Mounting Strap with charger mounting provisions Battery Tray Base Short Support Bracket Support Arm Tube Brace Vehicle-specific mounting hardware for both configurations Please Note: This is a mounting tray and hardware package only. Batteries, DC-DC chargers, wiring harnesses, fuses, Anderson plugs and all other electrical components must be purchased separately. Vehicle Compatibility Ford Ranger Next-Gen – 2022 to Present Compatible with applicable Ford Ranger Next-Gen models. Mounting-hole shape determines the available battery support and maximum allowable battery weight. Earlier models with circular mounting holes are limited to 15kg, while applicable 2026-onwards models with hexagonal mounting holes can support up to 20kg when the additional support bracket is correctly installed. Ford Ranger Super Duty – 2026 to Present Compatible with Ford Ranger Super Duty models. Hexagonal mounting holes allow the additional support bracket to be fitted, providing a maximum battery weight of 20kg. Ford Everest V6 – Compatible Compatible with Ford Everest V6 models. Check the mounting-hole shape to determine which support configuration and battery weight limit applies. Ford Ranger Raptor – Not Compatible Not compatible due to interference with the factory airbox. Specifications Product Type: Under-bonnet dual battery mounting tray and hardware only Vehicle Compatibility: Ford Ranger Next-Gen (2022–Present), Ford Ranger Super Duty (2026–Present) and Ford Everest V6 Mounting Location: Under bonnet Mounting System: Five-piece laser-cut metal assembly Finish: Textured black powder coat, with one structural bracket supplied raw Mounting Hardware: Included for both circular and hexagonal mounting-hole configurations Circular Mounting Holes: Maximum battery weight 15kg Hexagonal Mounting Holes: Maximum battery weight 20kg with additional support correctly installed Available Battery Space: Approximately 308mm (L) × 168mm (W) × 220mm (H) Tested Battery Compatibility: Invicta Xero 100Ah, Invicta Xero 120Ah and iTechworld 160Ah under-bonnet lithium batteries, subject to applicable weight restrictions Other Battery Compatibility: Other batteries may be suitable if they meet the available space and weight requirements; fitment has not been confirmed Charger Mounting: Integrated mounting provisions in upper battery strap for compatible REDARC DC-DC chargers Installation: Bolt-in using existing factory mounting locations; no drilling or cutting required Electrical Components: Not included Ford Ranger Raptor: Not compatible Warranty 2-Year Accelerate Off-Grid Touring Warranty on supplied metalwork.