Divinycell H Contoured PVC Foam Core - 32 x 48 in Scored Sheet

Divinycell H is the closed cell PVC foam core boat builders and repair shops use to rebuild decks, hulls and hatches. This contoured sheet is scored into small square blocks held together by a fiberglass scrim, so one 32 x 48 in sheet bends to follow a crowned deck, a hull side or a curved hatch without kerfing it yourself. Sheet: 32 x 48 in, about 10.7 sq ft, scored blocks on a fiberglass scrim. Thicknesses: 3, 4 and 5 mm for thin skins, kayaks and curved panels. 1/2, 3/4 and 1 in for decks, cockpit soles and hull repairs. Match the thickness of the core you cut out. Material: Divinycell H series closed cell PVC foam. It does not rot and takes on very little water if a skin is breached. Resins: bonds with epoxy, polyester and vinyl ester. Bedding: press it into a bed of thickened resin (resin with fumed silica and microballoons) so every block and joint fills and bonds. Cutting: a utility knife follows the scored joints; any fine tooth saw cuts across the blocks. Flat panels with no curve? The plain 2 x 4 ft Divinycell panels are rigid and cost less per square foot. Divinycell is a registered trademark of Diab. Ships in a long box. For the exact density on a given thickness, call or text (954) 245-0302.