96V 100A MPPT Solar Charge Controller

100A MPPT Solar Charge Controller – 96V LiFePO4 Need serious solar charging capacity for a high-voltage battery bank? Our 96V 100A MPPT Solar Charge Controller is designed for large off-grid solar systems using a dedicated 96V battery bank. With up to 100A charging current, MPPT tracking efficiency greater than 99.5% and support for solar arrays up to 9600W, this controller is well suited to off-grid homes, farms, workshops, communications systems and larger standalone solar installations. The controller provides configurable charging parameters for different battery systems. All charging voltages must be programmed to match the specifications supplied by your battery or BMS manufacturer. Browse our full range of Solar Charge Controllers, LiFePO₄ Battery Kits, DC-DC Chargers and Off-Grid Kits to build a complete solar and battery system. ☀️ High-Power MPPT Solar Charging MPPT technology continuously tracks the solar array’s maximum power point to make better use of the available solar energy. This controller offers MPPT tracking efficiency greater than 99.5% and maximum power conversion efficiency greater than 98%. When connected to a compatible 96V battery system, the controller supports up to 9600W of solar panel input. ⚡ Important PV Voltage Limits The solar array must be designed to operate within the voltage limits specified for the 96V controller: Battery System PV Open-Circuit Voltage Range Maximum PV Power 96V 160V–240V DC 9600W Important: The combined cold-weather open-circuit voltage of the solar array must remain within the controller’s permitted input range. Excessive PV voltage may permanently damage the controller. 🔋 96V Battery System Compatibility This model is the dedicated 96V version of the JN-MPPT-CL controller. Unlike the standard 12V, 24V and 48V model, the 96V system is not automatically identified. The correct battery type, charging voltages and protection settings must be configured before charging begins. Always ensure the settings are suitable for the battery chemistry, BMS requirements and specifications provided by the battery manufacturer. 📱 Monitoring & Communication An integrated RS485 communication port allows the controller to connect to supported monitoring equipment. Optional accessories can provide PC monitoring or Wi-Fi/GPRS-based app monitoring. RS485 communication Optional PC monitoring Optional Wi-Fi monitoring module Optional GPRS monitoring module External battery temperature sensing Please note: Wi-Fi, GPRS and PC monitoring hardware are optional and are not included unless specifically stated. 🛡️ Built-In Protection The controller incorporates multiple protection functions to help safeguard the solar charging system, including: PV over-voltage protection Battery reverse-polarity protection Battery over-voltage protection Battery over-discharge protection Charging over-current protection Equipment over-temperature protection Night-time reverse-current protection 🔧 Specifications Product Code JN-MPPT-CL-100A-96V Model JN-MPPT-CL 100A – 96V Rated Charging Current 100A Maximum Charging Current 100A Battery System Voltage Dedicated 96V battery system Maximum PV Input Power 9600W PV Open-Circuit Voltage Range 160V–240V DC MPPT Tracking Efficiency >99.5% Maximum Conversion Efficiency >98% Full-Load Efficiency Up to 97% Charging Method 3-stage MPPT / Boost / Float Battery Compatibility Battery charging parameters must be configured for the connected 96V battery bank Display LCD segment display with SET, ESC, UP and DOWN controls Communication RS485; optional Wi-Fi, GPRS and PC monitoring Battery Temperature Sensor External temperature probe supported DC Load Output Not available on the JN-MPPT-CL model Operating Temperature -20°C to +50°C Storage Temperature -30°C to +70°C Humidity 10%–90% Protection Rating IP30 Dimensions 340 × 208 × 95mm Weight 3.6kg Recommended Copper Cable Size at 100A 20mm² / AWG 4 minimum, as specified by the manufacturer ⚠️ Installation Notes This is a high-voltage and high-current solar charge controller. Installation must be completed by a suitably qualified technician using appropriate cable sizing, DC circuit protection, isolation, grounding and secure electrical connections. The controller should be installed upright in a clean, dry and well-ventilated location, protected from direct sunlight and water. The IP30 rating means this controller is not suitable for direct outdoor exposure. If an inverter is being used, connect the inverter directly to the battery bank rather than to the controller. The solar array must be disconnected or isolated before connecting or disconnecting the battery. Confirm the correct wiring sequence in the supplied manual before commissioning the system. 📦 Monitoring Options Depending on the configuration purchased, optional accessories are available for: RJ45 to USB PC communication RJ45 to Wi-Fi monitoring RJ45 to GPRS monitoring Warranty 2-year warranty from the date of sale, subject to correct installation and operation in accordance with the supplied instructions. For product manuals, setup information and supporting documentation, visit our Documents & Videos section.