Safety Shower & Eyewash Test Services

Safety Shower & Eyewash Test Services Emergency drenching and flushing equipment must work instantly and correctly when an exposure occurs. SPILLDOC’s Safety Shower & Eyewash Test Services verify that your stations perform to ANSI/ISEA Z358.1 requirements and meet expectations within Singapore’s WSH environment for emergency preparedness and maintenance. We conduct structured testing, measurement, documentation, and tagging to ensure every unit on your site is ready for immediate use. Why Testing Matters in Singapore Workplaces Under Singapore’s Workplace Safety and Health (WSH) duties, employers must ensure emergency equipment is functional, accessible, and maintained. In chemical handling areas, laboratories, workshops, and process plants, non-performing showers/eyewashes can lead to: Serious injury during chemical exposure Non-compliance observations during audits Equipment failure due to poor maintenance or water quality issues SPILLDOC testing aligns your equipment condition with ANSI performance criteria and good WSH practice. What SPILLDOC Tests (Aligned to ANSI/ISEA Z358.1) Test Area ANSI Requirement (Summary) What SPILLDOC Verifies Onsite Location & Accessibility Reachable within 10 seconds, unobstructed path Travel path, signage visibility, clearance Activation Valve One-second activation, hands-free stay open Valve operation, pull rod/plate condition Shower Flow Rate ≥ 75.7 L/min for 15 minutes Measured flow using calibrated container Eyewash Flow Rate ≥ 1.5 L/min for 15 minutes Dual stream pattern, height and alignment Spray Pattern Proper flushing coverage Symmetry, steady streams, no blockage Water Temperature Tepid (16–38°C) Temperature measurement during flow Duration Capability Continuous 15-minute supply Pressure stability and supply adequacy Weekly Activation Check Prevent stagnation & sediment Evidence of routine flushing practice Physical Condition Corrosion, leaks, damaged parts Pipework, heads, valves, drain condition Signage & Visibility Clear identification ANSI-compliant signage presence Inspection Tagging Record of checks Tagging, checklist, service record Our Service Scope Functional flow testing of safety showers and eyewash stations Measurement of flow rate, spray pattern, and temperature Inspection of valves, pipework, shower heads, eyewash nozzles Identification of obstructions, corrosion, and poor accessibility Verification of signage and visibility Inspection tagging and service checklist report Recommendations for rectification if non-compliant Suitable for These Environments Chemical storage and dosing areas Laboratories and research facilities Manufacturing and process plants Warehouses handling hazardous substances Marine, oil & gas, and maintenance workshops Construction and industrial sites What You Receive After Each Service Completed inspection checklist per unit Flow rate and temperature readings recorded Equipment status tag on each station Summary report with findings and recommendations Service record for WSH audit and internal compliance tracking Recommended Testing Frequency (Good Practice) Weekly: Internal activation flush by site team Quarterly / Bi-Annual: Professional functional testing by SPILLDOC After plumbing works or modifications: Re-testing required Keep Your Emergency Equipment Ready In an exposure incident, there is no time to troubleshoot. SPILLDOC ensures your Safety Shower & Eyewash Stations are fully functional, compliant, and ready to protect your people. Schedule your ANSI Z358.1 Safety Shower & Eyewash Test Service with SPILLDOC for dependable emergency readiness in your Singapore workplace.