Silver Reflective RF Shielding Custom Window Film

Features Reflective Silver RF Shielding Window Film for Homes, Offices and Professional Spaces Designed to Reduce Radio Frequency and Microwave Signals Through Glass High-Reflectivity Silver Finish for Improved Daytime Privacy and Glare Reduction Helps Shield Against WiFi, Mobile Mast, Smart Meter and Neighbouring Wireless Signals Blocks Over 99% of UV Rays and Over 90% of Infrared Rays Supplied as a Custom Cut Size to Suit Your Project Requirements Benefits Ideal for Reducing RF Signals Entering Through Windows and Glass Areas Useful for Privacy, Wireless Security and TSCM-Style Signal Reduction Projects Provides Strong Glare Reduction for Brighter Rooms, Screens and Workspaces Helps Protect Furniture, Flooring and Décor from UV-Related Fading Can Help Keep Rooms Cooler by Reducing Solar Heat Gain Suitable for Residential, Commercial, Office and High-Privacy Shielding Projects What's Included Signal Protect Silver RF Shielding Window Film Cut to Your Selected Size Choice of 3 ft, 4 ft or 5 ft Widths Custom Cut Length Based on Your Project Requirements Self-Adhesive Film with Water-Activated Application How to Use Signal Protect Silver RF Shielding Window Film is designed to be applied directly to suitable glass surfaces where radio frequency shielding, glare reduction, solar heat control and improved daytime privacy are required. Before ordering, measure your glass area carefully and allow extra material where needed for trimming, alignment and installation adjustments. As this product is supplied as a custom cut size, it is important to check your measurements before placing your order. Before installation, measure the area with a suitable RF meter to identify whether windows are a major entry point for external wireless signals. RF shielding works best when the strongest signal direction and surrounding leakage points are understood before installation. Clean the glass thoroughly before application. The film uses a water-activated adhesive and should be installed carefully to avoid trapped dust, bubbles, creases or gaps around the edges. Installation should not begin if the glass temperature is below 5°C / 40°F. For larger windows, professional installation is recommended for the cleanest finish and best long-term performance. If multiple sections are required, plan joins carefully to reduce gaps in the shielding layer. For complete room shielding, remember that signals may still enter through unshielded walls, ceilings, floors, doors, vents or window frames. Installation Notes Measure your required size carefully before ordering, as this product is custom cut to order. Allow extra material for trimming, alignment, joins and installation adjustments. Measure RF levels before and after installation with a suitable RF meter. Install only on suitable glass surfaces and follow professional window film application methods. Do not begin installation if glass temperature is below 5°C / 40°F. Ensure the glass is clean, smooth and free from dust before applying. For larger panes or high-value installations, professional installation is recommended. RF shielding performance depends on coverage, installation quality, gaps and surrounding unshielded areas. The reflective silver finish provides stronger glare reduction and privacy than clear film, but it also allows less visible light through. Windows are often only one part of a full shielding plan; walls, ceilings, floors and doors may also need assessment. Custom cut film is supplied to your selected size and cannot be returned unless faulty or defective. FAQs What is Signal Protect Silver RF Shielding Window Film used for? It is used to help reduce radio frequency and microwave signals entering through glass. Common sources may include WiFi, smart meters, mobile masts, neighbouring routers, cordless phones and other external wireless transmitters. Is this supplied in custom sizes only? Yes. This product is supplied as a custom cut size based on your selected width and length. Please measure carefully before ordering and allow extra material for trimming, alignment and installation adjustments. How is the silver film different from the clear version? The silver version has a more reflective finish, lower visible light transmission and stronger glare reduction. It is a better option where privacy, heat control and glare reduction are priorities, while the clear version is better where a brighter, more natural window appearance is preferred. Will it make the room darker? Yes, compared with clear film. The silver film has approximately 22% visible light transmission, so it gives a more tinted, reflective appearance and reduces glare significantly. Does it block mobile phone and WiFi signals? It is designed to reduce radio frequency signals, including common wireless communication signals. Final results depend on coverage, installation quality and whether signals can still enter through nearby unshielded surfaces. Does it improve privacy? Yes, the reflective silver finish can improve daytime privacy by making the glass more reflective from the outside. Privacy levels can vary depending on indoor and outdoor lighting conditions. Does it help with heat and UV? Yes. The film is designed to block over 99% of UV rays, over 90% of infrared rays and reject approximately 76% of total solar energy. Can it help protect furniture from fading? Yes. By reducing UV transmission through glass, the film may help reduce UV-related fading of furniture, flooring, fabrics and décor. Can I install it myself? Smaller sections may be suitable for careful DIY installation, but larger windows are best installed professionally to avoid bubbles, creases, contamination or alignment issues. What widths are available? The film is available in 3 ft, 4 ft and 5 ft widths, with the length custom cut to your selected size. Will multiple quantities arrive separately? Where possible, multiple quantities of the same width may be supplied as one continuous roll rather than separate pieces. This can depend on the selected size, stock format and order requirements. Can I return it if I order the wrong size? As this product is custom cut to your selected size, returns cannot be accepted for incorrect measurements, change of mind or unsuitable sizing. Returns can only be accepted if the item has a manufacturing defect or is received in a faulty condition. Specs Specification Details Product Type Custom Cut Silver RF Shielding Window Film Shielding Type Radio Frequency / Microwave Shielding Application Surface-applied glass window film Adhesive Type Self-adhesive, water-activated application Visible Light Transmission 22% Visible Light Reflectance - Exterior 45% Visible Light Reflectance - Interior 43% RF Shielding Performance Up to 99.99% depending on frequency and installation RF Power Attenuation @ 1 GHz -34 dB / approx. 99.96% RF Power Attenuation @ 2 GHz -32 dB / approx. 99.93% RF Power Attenuation @ 10 GHz -34 dB / approx. 99.96% UV Blocking Over 99% Infrared Blocking Over 90% Total Solar Energy Rejected Approx. 76% Appearance Silver tinted reflective finish Description Reflective Available Widths 3 ft, 4 ft and 5 ft Supplied Length Custom cut to your selected length Minimum Quantity Custom cut from 5 linear ft minimum Full Roll Length 100 ft Thickness 2 mil Installation Temperature Do not install if glass temperature is below 5°C / 40°F Suitable For Homes, offices, commercial buildings, TSCM-style projects and RF shielding installations Warranty 10-year warranty Returns Custom cut product - returns accepted only for manufacturing defects or faulty condition Returns Kindly understand that due to the unique nature of this product and its custom sizing, returns can only be accepted in the event of a manufacturing defect or if the item is received in a faulty condition. If you have any questions, please contact info@anti-radiation.co.uk. Warranty Signal Protect Silver RF Shielding Window Film is covered against manufacturing faults under normal use and correct handling. This warranty does not cover accidental damage, incorrect measurements, ordering the wrong size, incorrect installation, bubbles or creases caused during application, poor surface preparation, cutting errors, unsuitable glass use, normal wear and tear, improper cleaning, damage from abrasive tools, or use outside the intended purpose. Please contact us with your order number if you believe your item has developed a fault.