Linvo Beyond 100K Disposable

100,000 Puffs with FreshFlow Technology The Linvo Beyond 100K is the highest-capacity disposable in the Linvo lineup, delivering up to 100,000 puffs from 30mL of 20mg/mL nicotine salt. What sets it apart from other high-puff disposables is Linvo's FreshFlow Technology, an AI-driven e-liquid delivery system that continuously pumps liquid into the wick at a controlled rate, increasing e-liquid utilization by 86% and virtually eliminating dry hits. Combined with a 3D dynamic curved screen, dual mesh coils, and Flash Charging, this is Linvo's most advanced device to date. Important: This is an all-in-one disposable device. It is prefilled and sealed, meaning it cannot be refilled or have its coil replaced. The 900mAh battery is rechargeable via USB-C so you can use the full 30mL of e-liquid before disposal. Puff count is based on 1-second draws in standard mode; actual results vary with usage patterns and power mode. What Makes the Beyond 100K Different FreshFlow Technology + AI Auto Refills Most disposables rely on passive wicking, where cotton absorbs e-liquid by capillary action alone. The Beyond 100K uses an active pump system that continuously feeds e-liquid into the wick at a precisely controlled rate. Linvo calls this FreshFlow Technology, and it increases e-liquid utilization by 86% compared to traditional wicking. The AI Auto Refills component monitors your draw patterns and adjusts the feed rate accordingly, keeping the wick saturated through long sessions without flooding it during breaks. 100,000 Puffs from 30mL The Beyond 100K pushes into six-figure territory for puff count, making it one of the longest-lasting disposables available in Canada. With 30mL of prefilled nicotine salt e-liquid, most vapers can expect 3 to 5 weeks of use from a single device depending on draw frequency and power mode. The combination of FreshFlow Technology and dual mesh coils means less e-liquid is wasted per puff compared to devices that rely on passive wicking alone. 3D Dynamic Curved Screen The Beyond 100K features a large curved display that shows battery life, e-liquid level, current power mode, and puff count in real time. The 3D dynamic interface updates live as you vape, giving you full visibility into the device's status without guesswork. It is one of the more visually striking screens on any disposable currently available. Dual Mode: Fresh + Boost Fresh mode delivers a smooth, balanced draw optimized for flavour clarity and maximum e-liquid longevity. Boost mode ramps up the coil output for denser vapour, stronger throat hit, and more intense flavour at the cost of slightly faster e-liquid consumption. Switch between modes to match your moment, whether you want an all-day casual draw or a punchy session. Dual Mesh Coil Two mesh coils heat the e-liquid from a larger surface area than a single-coil design, producing smoother, more even vapour with richer flavour reproduction. The dual mesh setup also pairs with the FreshFlow pump to ensure both coils remain properly saturated, maintaining consistent performance even at high puff counts when other disposables start to degrade. Flash Charging + Adjustable Airflow The 900mAh rechargeable battery supports Flash Charging via USB-C for fast top-ups between sessions. Adjustable airflow lets you dial in your preferred draw resistance, from a tighter mouth-to-lung pull to a more open restricted direct-to-lung inhale. Both features give you control over a device that is designed to last weeks, not days. Specifications Product Linvo Beyond 100K Disposable Vape E-Liquid Capacity 30mL (prefilled, non-refillable) Nicotine Strength 20mg/mL nicotine salt Puff Count Up to 100,000 puffs Battery 900mAh (rechargeable) Charging USB-C (Flash Charging) Coil Dual mesh Technology FreshFlow + AI Auto Refills Power Modes Fresh + Boost Airflow Adjustable Display 3D Dynamic Curved Screen Activation Draw-activated Flavour Options 10 flavours Ingredients Vegetable Glycerin, Propylene Glycol, Flavour, Nicotine Salt Made By Linvo How FreshFlow Technology Works 1 AI monitors your draw pattern The built-in chip tracks draw frequency, duration, and intervals between puffs to predict wicking demand. 2 Active pump feeds the wick Instead of relying on passive cotton absorption, a micro-pump continuously delivers e-liquid to the dual mesh coils at the optimal rate. 3 86% more e-liquid utilization Traditional wicking wastes e-liquid through uneven absorption and residual liquid left in the tank. FreshFlow's controlled delivery extracts significantly more usable vapour from the same 30mL. 4 Consistent flavour to the last puff Because the wick stays properly saturated throughout the entire lifespan, you get the same flavour quality at puff 90,000 that you had at puff 1,000. All 10 Flavours The Beyond 100K launches with 10 flavour profiles focused on clean fruit combinations without overwhelming menthol. Most profiles lean towards natural, balanced blends rather than heavily iced formulas. Fruit Blends Blueberry Raspberry LemonMango PineapplePeach RaspberryStrawberry BananaStrawberry DragonfruitStrawberry KiwiWhite Peach Ice + Menthol Lemon Lime IcePomegranate Lime IceDouble Mint Linvo Beyond 100K vs. Other High-Puff Disposables Feature Linvo Beyond 100K STLTH x Geek Bar 80K Flavour Beast Alpha 80K Puff Count Up to 100,000 Up to 80,000 Up to 80,000 E-Liquid Capacity 30mL 30mL 30mL Battery 900mAh 900mAh 900mAh Coil Type Dual mesh Mesh Dual mesh Wicking System FreshFlow active pump Passive wicking Passive wicking Power Modes Fresh + Boost Normal + Boost Normal + Boost Display 3D Dynamic Curved LED Screen LED Screen Airflow Adjustable Adjustable Adjustable Flavour Count 10 20+ 20+ Key Differentiator Active pump wicking, highest puff count STLTH + Geek Bar collab, wide flavour range Flavour Beast recipes, established brand How to Use the Linvo Beyond 100K Unbox and inspect. Remove the Beyond 100K from its packaging. Check that the device is intact and the mouthpiece is clean. The device comes prefilled and ready to use. Charge before first use (recommended). Connect the USB-C cable to the charging port and charge until the display shows a full battery. While the device ships with some charge, a full top-up ensures the best initial experience. Select your power mode. The Beyond 100K defaults to Fresh mode for smooth, balanced draws. Switch to Boost mode for stronger flavour and denser vapour. The 3D curved screen shows your current mode. Adjust the airflow. Use the airflow control to set your preferred draw resistance. A tighter setting mimics a mouth-to-lung cigarette-style pull; a more open setting delivers a looser, airier draw. Inhale to vape. The device is draw-activated. Simply inhale through the mouthpiece to produce vapour. No buttons required. The FreshFlow system activates automatically to keep the wick saturated. Recharge as needed. When the battery runs low, connect the USB-C cable for Flash Charging. The 900mAh battery will need multiple recharges over the device's 100,000-puff lifespan. Monitor battery level on the curved display.