Mars iTime Smart Timer 2-Outlet Growing Accessory | 12-Group Scheduling

The Mars iTime Smart Timer is a dual-outlet, WiFi- and Bluetooth-enabled scheduling controller engineered for craft operators who require automated, repeatable light cycle management without manual intervention at the panel. Outcome: Automated, multi-group ON/OFF scheduling across two independently controlled outlets via the MarsPro App — eliminating manual cycle management and schedule drift. Replaces: Mechanical plug-in timers, manual switching routines, and single-outlet analog controllers that cannot support multi-group or remote scheduling. Environment: Indoor use only; rated for operation from -20°C to 40°C; compatible with US 125V AC and EU 230V AC infrastructure. FACTORY-AUTHORIZED DEALER — CANNAFULL SPECTRUM SOLUTIONS Deployed in licensed commercial facilities across the United States. Quick Spec: 125V AC (US) / 230V AC (EU) | 13A Maximum Current | 1,625W (US) / 2,990W (EU) Maximum Load | 2 Independently Controlled Outlets | Bluetooth & WiFi | 4.47" × 3.21" × 3.46" | 0.57 lb | 1-Year Warranty Precision Control in Any Space Uncontrolled scheduling is a silent yield killer. When light cycles drift — because a mechanical timer slips, a manual switch gets missed, or a single-outlet controller can't differentiate between two loads on the same circuit — the photoperiod signal your canopy depends on becomes unreliable. Inconsistent ON/OFF execution compresses vegetative development windows, disrupts flowering induction timing, and introduces the kind of cycle variance that compounds across every run. The cost is not always visible in a single harvest; it accumulates in suppressed uniformity, extended cycle times, and the operational overhead of manually auditing equipment that should be running itself. After deployment, the facility runs on schedule — not on memory. Two outlets execute independently programmed cycles without operator presence at the panel. Recycle Mode handles repeating intervals automatically. Multi Mode supports up to 12 discrete ON/OFF groups per outlet, giving operators the granularity to stage lighting sequences, coordinate supplemental systems, and lock in photoperiod transitions that repeat identically from one run to the next. Remote visibility through the MarsPro App means schedule confirmation and adjustment happen from anywhere on the network, not from a ladder in the room. The mechanism behind that reliability is a compact, dual-outlet controller rated at 13A and 1,625W on US 125V AC infrastructure (2,990W on EU 230V AC), with Socket 1 and Socket 2 operable independently or simultaneously via the ALL function. Connectivity is dual-channel — Bluetooth for local pairing and WiFi for remote management through the MarsPro App — with a built-in rechargeable battery (pre-installed) maintaining schedule memory through power interruptions. The clear display shows live time and active settings; individual power indicator lights confirm the ON state of each outlet without requiring app access. Operating range spans -20°C to 40°C, and the unit ships at 0.57 lb in a 4.47" × 3.21" × 3.46" form factor that installs without dedicated panel space. In practical terms, the Mars iTime Smart Timer delivers 12-group programmable scheduling across two independently controlled 13A outlets at 1,625W maximum load on standard US 125V AC circuits. Where This Belongs (and Doesn't) This controller is rated for indoor use only. It is not a circuit protection device and does not replace dedicated breaker panels, GFCI outlets, or licensed electrical infrastructure. Load calculations must be verified against facility wiring before deployment. Do not exceed the 13A / 1,625W (US) or 2,990W (EU) maximum load ratings. Consult a licensed electrician for any permanent installation or high-density multi-unit deployment. Appropriate Applications LED grow light ON/OFF cycle automation in single- or multi-light configurations within load rating Supplemental lighting coordination (UV, far-red) requiring independent scheduling from primary fixtures Environmental control equipment: fans, humidifiers, dehumidifiers, CO2 controllers operating within rated load Multi-group photoperiod staging across vegetative and flowering zones Remote schedule management in facilities where physical access to the timer is limited or inconvenient Outside Rated Use Outdoor or wet-environment installation — rated for indoor use only Loads exceeding 13A / 1,625W on US 125V AC circuits Permanent hardwired installation without licensed electrical oversight High-inrush motor loads that exceed the continuous current rating at startup How It Works The Mars iTime Smart Timer operates on three control modes that address different scheduling requirements without requiring separate hardware for each use case. Manual ON/OFF provides direct outlet switching for immediate load control. Recycle Mode executes repeating ON/OFF intervals automatically — useful for cyclic ventilation, intermittent supplemental lighting, or any load that requires consistent interval-based operation without a fixed clock time. Multi Mode is the primary scheduling engine: up to 12 independent groups of ON/OFF times can be programmed per session, giving operators the resolution to build complex, multi-stage lighting sequences within a single controller. Socket 1 and Socket 2 are independently addressable, meaning two separate loads can run on entirely different schedules from the same unit — or both can be triggered simultaneously using the ALL function when synchronized operation is required. The built-in rechargeable battery (pre-installed, no separate purchase required) preserves programmed schedules through power interruptions, preventing schedule loss during facility power events. The clear display provides real-time visibility into active time and settings; per-outlet power indicator lights confirm ON state without requiring the operator to open the MarsPro App. Bluetooth enables local device pairing for initial setup and close-range adjustments; WiFi extends remote management capability across the facility network or off-site. The unit operates across a -20°C to 40°C temperature range and draws no significant standby load given its 0.57 lb, 4.47" × 3.21" × 3.46" form factor. In practical terms, the Mars iTime Smart Timer delivers dual-outlet independent scheduling with 12-group Multi Mode programming, Bluetooth and WiFi connectivity, and battery-backed schedule retention in a 0.57 lb controller rated at 13A / 1,625W on US 125V AC. Commercial Assurance Warranty: 1-Year manufacturer warranty on the Mars iTime Smart Timer (MARS-iTIME-02 / MARS-ADLITE-04). Warranty coverage is administered through Cannafull Spectrum Solutions as a factory-authorized dealer. Battery Backup: Built-in rechargeable battery is pre-installed at the factory — no separate installation or purchase required. Schedule memory is retained through power interruptions without operator intervention. Dual-Voltage Compatibility: The unit ships with US 125V AC and EU 230V AC compatibility, supporting deployment across US-standard facility infrastructure at 13A / 1,625W maximum load. App Ecosystem: MarsPro App provides remote schedule management, outlet control, and status monitoring via Bluetooth and WiFi — consistent with the control architecture used across the broader Mars Hydro fixture lineup for operators running integrated systems. Authorized Distribution: Cannafull Spectrum Solutions is a factory-authorized dealer. Units are sourced through verified supply channels and carry full manufacturer warranty eligibility. System Integration MarsPro App Ecosystem: Integrates directly with the MarsPro App used across Mars Hydro's fixture lineup — operators already running Mars Hydro lights can manage timer scheduling within the same app interface without adding a separate control platform. Dual-Outlet Independent Control: Socket 1 and Socket 2 operate on separate schedules, enabling a single controller to manage two distinct loads — such as a primary fixture and a supplemental UV or far-red bar — without requiring a second timer unit. Multi-Group Scheduling Depth: Up to 12 ON/OFF groups in Multi Mode provides the scheduling resolution required for staged photoperiod transitions, multi-phase lighting protocols, and coordinated environmental equipment cycles. Battery-Backed Retention: Pre-installed rechargeable battery ensures programmed schedules survive facility power events without requiring manual reprogramming — critical for unattended operation during off-hours. Compact Form Factor: At 4.47" × 3.21" × 3.46" and 0.57 lb, the unit installs at any standard outlet without occupying dedicated panel or rack space, supporting dense multi-zone deployments where physical footprint is constrained. Facility Integration Data The following fleet cost reference is provided for operators evaluating timer deployment across multi-zone or multi-room facilities. Per-unit pricing reflects the MH-Timer MAP of $23.99; iTime Smart Timer pricing is not specified in source data and should be confirmed at point of purchase. Fleet Size Units Reference Cost (MH-Timer @ $23.99) Outlets Controlled Entry Deployment 10 $239.90 10 (MH-Timer, single outlet per unit) Mid-Scale Deployment 20 $479.80 20 (MH-Timer) or 40 independently controlled (iTime Smart Timer) Full-Facility Deployment 50 $1,199.50 50 (MH-Timer) or 100 independently controlled (iTime Smart Timer) iTime Smart Timer fleet pricing not specified in source data. Contact Cannafull Spectrum Solutions for volume pricing on MARS-iTIME-02 / MARS-ADLITE-04 deployments. Outlet count for iTime Smart Timer reflects 2 independently controlled outlets per unit. Operator Field Notes Schedule Verification Before Each Run: Confirm active schedule groups in the MarsPro App or on the display before initiating a new production cycle. Multi Mode supports up to 12 groups — verify that legacy groups from prior runs are cleared or updated to avoid unintended overlap. Load Calculation Required: Do not assume the 13A / 1,625W rating accommodates all fixture combinations without calculation. Verify the combined inrush and continuous draw of all loads connected to each outlet before programming automated cycles. Battery Maintenance: The built-in rechargeable battery maintains schedule memory through power interruptions. Ensure the unit remains connected to power during normal operation to keep the battery charged; do not store the unit unpowered for extended periods. WiFi Network Stability: Remote management via the MarsPro App depends on a stable facility WiFi connection. For facilities with intermittent network coverage, Bluetooth provides local fallback control without requiring network access. Independent Outlet Scheduling: When using Socket 1 and Socket 2 on different schedules, label each outlet's load at installation. Unlabeled dual-outlet configurations create troubleshooting ambiguity during schedule audits or equipment changes. Temperature Operating Range: The unit is rated for -20°C to 40°C. In facilities where ambient temperatures in equipment areas approach the upper limit during peak summer operation, verify installation location does not exceed rated range. Operator FAQ Q: Can Socket 1 and Socket 2 run on completely different schedules simultaneously? A: Yes. Socket 1 and Socket 2 are independently addressable on the Mars iTime Smart Timer. Each outlet can be programmed with its own schedule in Multi Mode (up to 12 ON/OFF groups per session), or both can be triggered simultaneously using the ALL function when synchronized operation is required. This allows a single unit to manage two loads — such as a primary fixture and a supplemental environmental controller — on entirely separate timing sequences. Q: What happens to programmed schedules if the facility loses power? A: The Mars iTime Smart Timer includes a built-in rechargeable battery that is pre-installed at the factory. This battery maintains schedule memory through power interruptions, so programmed ON/OFF groups are retained without requiring manual reprogramming after a power event. The battery is included and requires no separate purchase or installation. Q: What is the maximum load the iTime Smart Timer can handle on a US circuit? A: On a US 125V AC circuit, the Mars iTime Smart Timer is rated at a maximum of 13A and 1,625W. On EU 230V AC infrastructure, the maximum load is 2,990W. These ratings apply to the combined load across both outlets. Operators must verify that the total connected load — including inrush current at startup — does not exceed the rated maximums. Exceeding the rated load voids warranty coverage and creates a fire and equipment risk. Q: Does the MarsPro App require a continuous WiFi connection to maintain scheduled operation? A: No. Once schedules are programmed and saved to the device, the timer executes those schedules independently of the app or network connection. WiFi and Bluetooth connectivity are used for remote management, schedule adjustment, and status monitoring — not for real-time schedule execution. If the network goes offline, previously programmed schedules continue to run. Bluetooth provides local fallback access for schedule changes without requiring network connectivity. Q: What is the difference between Recycle Mode and Multi Mode? A: Recycle Mode executes a repeating ON/OFF interval pattern — the same duration ON followed by the same duration OFF, cycling continuously. It is suited for loads that require consistent interval-based operation without a fixed clock time, such as cyclic ventilation or intermittent supplemental lighting. Multi Mode is the primary scheduling engine: it supports up to 12 independent groups of ON/OFF times per session, each tied to specific clock times, giving operators the resolution to build complex, multi-stage lighting sequences with precise start and stop times across the day or week. Q: What warranty coverage applies to the Mars iTime Smart Timer purchased through Cannafull Spectrum Solutions? A: The Mars iTime Smart Timer (MARS-iTIME-02 / MARS-ADLITE-04) carries a 1-year manufacturer warranty. Cannafull Spectrum Solutions is a factory-authorized dealer, and units purchased through our store carry full manufacturer warranty eligibility. Warranty claims for defective units are processed through Cannafull Spectrum Solutions. Contact our support team at the address listed in the Shipping & Logistics section to initiate a warranty claim. Shipping & Logistics Shipping Jurisdiction: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, US territories, and international destinations including Canada are not fulfilled. Carrier & Transit: Standard ground shipping applies to timer accessories. Expedited shipping options may be available at checkout. Tracking information is provided at time of shipment. Returns: Defective units are eligible for return or replacement under the 1-year manufacturer warranty. Non-defective returns are subject to our standard return policy. Contact support before initiating any return shipment. Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering. Contact Cannafull Spectrum Solutions: support@cannafullspec.com | cannafullspec.com What's in the Box 1x Mars iTime Smart Timer unit (MARS-iTIME-02 / MARS-ADLITE-04) with 2 AC outlets Built-in rechargeable battery (pre-installed at factory — no separate installation required) User manual / setup documentation Box contents confirmed from manufacturer source data. Accessory cables, mounting hardware, and additional outlet adapters are not listed in source documentation and are not confirmed as included. Verify complete box contents against the physical shipment upon receipt. If any listed item is missing or damaged, contact Cannafull Spectrum Solutions support before use. Regional Compliance & Deployment Notes Input Voltage: The Mars iTime Smart Timer is rated for 125V AC (US Plug) and 230V AC (EU Plug). Verify facility input voltage matches the plug variant ordered. Operating the unit outside its rated voltage range will void warranty and may create a safety hazard. Indoor Use Only: This device is rated for indoor use only. Do not install in outdoor enclosures, wet locations, or environments subject to condensation, water ingress, or direct moisture exposure. Operating Temperature: Rated operating range is -20°C to 40°C. Installations in equipment rooms or enclosures where ambient temperatures may approach or exceed 40°C require thermal assessment before deployment. Electrical Code Compliance: Installation and use must comply with applicable local and national electrical codes. This device is not a circuit protection component. Facilities must maintain appropriate breaker protection, GFCI outlets where required, and licensed electrical infrastructure independent of this controller. US Distribution Only: Cannafull Spectrum Solutions distributes this product within the contiguous 48 United States only. Compliance with electrical standards outside the United States is the responsibility of the end user and is not supported by Cannafull Spectrum Solutions. Compliance information is provided for reference based on manufacturer source data and general US electrical standards. Cannafull Spectrum Solutions does not provide licensed electrical or legal compliance advice. Operators are responsible for verifying that all installations meet applicable local, state, and federal requirements for their specific facility and jurisdiction.