1200°F Hi-Temp Brush-On Paint

RUTLAND 1200°F Hi-Temp Flat Black Brush-On Paint is specially formulated to resist peeling and blistering in temperatures up to 1200°F. Renews the finish on natural cast iron, grills, ovens, or cookers – anywhere a high-temperature-resistant, flat black coating is needed. This quality paint is great for grills, stoves, smokers, stove pipes, fireplace inserts, furnaces, barbecues, mailboxes, lampposts, fireplace tools, brass, firebrick, and chimney caps. Use with confidence that your paint will look great for years to come all while keeping rust at bay. 16 fl oz Can Flat black Contains no lead, fluorocarbons, or vinyl chloride No primer needed 1 year UV resistance after application Fast drying and color-fast Non-toxic when dry Weather- and heat-resistant Heat cure is not required, but best results are obtained after heat curing Not for direct food contact Indoor and outdoor use Can be used to paint the inside of a masonry firebox Not for sale in California Made in the USA WARNING: This product can expose you to chemicals including Toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. Product Details Weight: 1.09 lbs Dimensions: 4 × 3.375 × 3.375 in Safety Data RUTLAND 81 SDS Directions Wear protective gloves and eyewear. Prepare surface by removing all loose, scaly material and sanding rusty spots with fine sandpaper. Remove any polish or wax with lacquer thinner. DO NOT THIN PAINT. Stir paint until uniform throughout. Brush on COLD SURFACE. FIRE MUST BE COMPLETELY OUT. Only 1 layer is recommended. For best results, allow paint to air-dry for 24 hours, then heat cure to 500°F. Be sure all paint is dry before re-firing. Provide ventilation when firing for the first time after painting. Some smoke and odors are given off during this process. Heat cure is recommended for best results, but is not required.