CB2W100-150 Bently Nevada Interconnect Cable

Bently Nevada CB2W100-150 Interconnect Cable The Bently Nevada CB2W100-150 Interconnect Cable provides reliable connections for your monitoring system over extended distances. This premium cable features MIL-C 5015 connectors with a splash-proof design and 150 foot length. Key specifications Brand: Bently Nevada | Model: CB2W100-150 Type: Interconnect Cable for sensors and accelerometers Length: 150 feet (45.7 meters) Connectors: MIL-C 5015, 2 socket, splash proof Cable type: 20 AWG, twisted pair, shielded Jacket material: Yellow Teflon® Included components: Locking ring, adapter seal, and O-ring Termination: Isolated to blunt cut Origin: Made in U.S.A. Important compatibility notes Not for use with 200350 Accelerometer: The O-ring will not form a proper seal with that accelerometer model. High frequency attenuation: This cable exceeds 30 meters (100 feet). Expect noticeable amplitude attenuation at higher frequencies when using the AM3100T2-Z2 Accelerometer. Installation requirements Ensure compatible sensor before connecting this cable Check O-ring condition before each installation Tighten locking ring securely but do not over-torque Keep cable away from sharp edges and high heat sources Expect reduced high frequency response due to cable length Consider using shorter cable for critical high frequency measurements Package includes One CB2W100-150 interconnect cable assembly Locking ring pre-installed Adapter seal and O-ring included Shipping via FedEx, UPS, or DHL Frequently asked questions What sensors work with this CB2W100-150 cable? This cable works with most Bently Nevada sensors that accept MIL-C 5015 2-socket connectors. Do not use with the 200350 Accelerometer. How does this 150 foot cable affect my signal? For high frequency measurements with AM3100T2-Z2 Accelerometer, expect noticeable amplitude attenuation. Lower frequency measurements remain reliable. When should I choose this 150 foot cable? Select this length when your sensor must locate far from the monitor. For critical high frequency data, consider moving the monitor closer or using signal conditioning. Why is Teflon jacket important for long cables? Teflon provides excellent chemical resistance and durability. This protects the long cable run in harsh industrial environments. What does isolated to blunt cut mean? The sensor end has an isolated connector. The other end has a blunt cut for field termination or connection to your monitoring system. Can I extend this cable even further? Extending beyond 150 feet will increase signal attenuation. For longer runs, consult Bently Nevada for application-specific recommendations. Is the O-ring replaceable? Yes, you can replace the O-ring if damaged. Use the correct size for proper splash proof sealing. How do I choose between different CB2W100 lengths? Use 015 (15ft) for short runs, 064 (64ft) for medium runs under 100ft, and 150 (150ft) for long runs where some high frequency attenuation is acceptable. Does this cable work with other accelerometer models? Yes, the compatibility issue only applies to the 200350 Accelerometer. Other accelerometers with MIL-C 5015 2-socket connectors work properly.