Clack WS1 1" Plastic Male NPT Elbow Assembly

Simplify your water softener or whole-house filtration installation with the genuine Clack WS1 1" Plastic Male NPT Elbow Assembly. Designed specifically for the industry-standard Clack WS1 control valves, this set of two 90-degree elbows allows you to route your plumbing cleanly and efficiently. The unique quick-connect design allows the elbow fittings to swivel a full 360 degrees before tightening. This gives you the ultimate flexibility to approach the water treatment system from the ceiling, floor, or wall while keeping the appliance tight against the wall to save valuable floor space. Plumbing Compatibility Guide The universal thread type acts as a gateway to virtually any pipe material used in modern residential plumbing. You can easily adapt this fitting to: PEX-A / PEX-B Tubing: Transition easily to flexible PEX lines by threading a standard 1" Female NPT x 1" PEX adapter (such as a crimp barb or a PEX-A cold-expansion fitting) directly onto these plastic threads Copper Pipes: Connect to copper lines using a 1" Female NPT threaded brass adapter. Note: Always sweat/solder your copper lines to the adapter first, allow the metal to cool completely, and then thread it onto the plastic Clack assembly to avoid melting the composite material. CPVC & PVC Piping: Use standard 1" Female NPT schedule 40 or schedule 80 female adapters to hook up rigid plastic lines. Corrugated Stainless Steel: Thread flexible water softener connector hoses directly onto the male ends for a quick, vibration-resistant setup. Specifications Brand: Clack Part Number: V3007 Product Type: Elbow connector assembly Connection Size: 1" male NPT Configuration: 90-degree elbow Material: Plastic/PVC Compatibility: Clack WS1 control valves and Clack bypass valves Application: Water softener and water filtration system plumbing connection Includes 2 x 90-degree 1" male NPT elbow fittings 2 x Clack quick-connect nuts 2 x retainer/split rings 2 x O-rings Installation Tip When connecting your female plumbing adapters to the plastic 1" male NPT threads, always use a high-quality thread sealant tape (Teflon tape) or a plastic-safe pipe thread paste. Tighten the connection by hand, and then add 1 to 1-1/2 turns with a wrench. Do not overtighten, as excessive force can strip or crack the plastic threads.