ACTIONPOWER High Power DC Source & Load Titan DC series up to to 7.5MW

TITAN Series Battery Simulator Power Supply High-Voltage Bidirectional DC Platform for E-Mobility, ESS, and Converter Testing Programmable Bidirectional DC Power Supply Developing component prototypes such as inverters for DERs like windturbine and solar farm or EV charging system, onboard chargers and V2G technology research, usually requires validating its reliability and stability in operation when connected with, as what will eventually happen in real world after their implementation, a high-voltage and high-power battery system. However, it is fundamentally unrealistic for any EV manufacturers and energy system integration companies to have at their disposition a real battery systems to which then can connect their products for validating, either for reasons of lack of controllability and the high cost. A battery simulator power supply is what you should rely on by contrast, to achieve better effectiveness and testing sequence automation. TITAN Battery Simulator Power Supply, with legacy model name of ABS series, is a bidirectional power testing equipment that offers maximum level of 2000 VDC and offers parallel connection options for building testing platform with 10MW as maximum power rating of the same. The system's bidirectionality emulates a battery's operation pattern of both consuming and producing battery from one unit, further supported by smart built-in interfaces and remote softwares for users to configure at their discretion and emulate the required battery charging and discharging profile against their products, along side with versatile options for simulating batteries of various chemical compositions. Highlighted Features DC output voltage covers range from 20 to 1500 VDC or 2000 VDC High Precision: Voltage accuracy ±0.1% F.S., Current accuracy ±0.1% F.S. High Dynamics: Titan series products' load rise/fall time (10%–90%) is 2 ms, positive/negative load switching time (-90%–90%) is 4 ms; voltage slew rate of 200 V/ms; Parallel connection for upscaling to 10MW output power Comprehensive battery chemistry profiles and emulation (LiMn204, LiCoO2, LiFePO4, NiMH, LiTiO2, PbO2, Ternary Li...) Open 1st-, 2nd-, and 3rd-order RC battery models; Simulink battery models upload supported Bidirectional power operation capability and regenerative load technology that recovers 94% power recovery Internal resistance setting and programming through smart software CC, CR, CV, CP output modes supporte MULTIHIGH POWER CAPACITY WITH PARALLEL OPERATION With 300kW - 750kW of unit capacity, the total capacity can be expanded up to 7.5MW by parallel connections. Multiple DC power supply cabinets can individually operate in single mode to configure multi-channel output, or in Master/Slave mode to configure singlechannel output with combined capacity. SIMULATION FUNCTION Titan DC series provide real-time battery and PV simulation function with fast response time of less than 1 ms. Titan DC series provide grid-regenerative DC electronic load function, which is applicable for testing fuel cell stack or fuel cell engine system, etc. Ratings, types and voltages Titan DC series 300kW Technical data High Power Scalable Design Titan DC series supports multi-unit parallel operation and adopts high-speed fiber optic communication technology, featuring strong anti-interference capability and zero latency. The system supports expansion up to 7.5MW by connecting in parallel in 1MW increments from 300kW minimum. It enables multiposition, high-capacity, and multi-voltage level test setups, significantly improving testing efficiency for customers. In particular, the parallel-connected panels can be used in multi-output mode by separating the outputs according to the user's needs, allowing multiple test equipment to be tested at the same time, maximizing user convenience and saving a lot of costs. Auto Ranging The auto ranging function automatically controls voltage and current through the programmable DC power supply to maintain the rated output over a wide operating range. That is the higher voltage is available at lower current, and vice versa, allowing the DUT to be tested under different voltage/current conditions with a single DC power supply. I n addition, it supports smooth and ultra-fast automatic switching with the bidirectional Automatic “source” & “load” function. The overshoot of voltage or current can be effectively controlled without any delay in the transition between the two states of source and load. CV/CC Priority Setting Function CV (constant voltage) priority / CC (constant current) priority mode can be selected and set: Suppression of Overshoot with CC Priority Mode With the Titan DC series power supply, the CC priority mode can effectively respond to load variations. This mode suppresses momentary current spikes when the load suddenly changes its resistance, thus ensuring stable protection for sensitive loads. Configuring the power supply in CC priority mode allows for voltage adjustment according to load changes, maintaining a stable current. This effectively protects sensitive loads such as high-power laser diodes and minimizes the risk of damage due to overshoot. Current Overshoot in CV Priority Mode In CV priority mode, the power supply prioritizes maintaining a constant output voltage. However, sudden load variations can cause momentary current spikes, posing a risk of damage to sensitive loads. Therefore, configuring the Titan DC series power supply in CC priority mode enhances load stability and prevents damage caused by overshoot. Application ActionPower's high-capacity bi-directional DC power supplies are innovative products that are used in a variety of applications based on unique technology and optimal performance. ActionPower products can act as regenerative electronic load while providing bi-directional DC power, which is applicable of longterm reliability test applications such as electric vehicle DC charging stations, automotive battery charge and discharge tests, fuel cell discharge tests, ESS charge and discharge tests, and other applications requiring very fast response time, such as simulating electric vehicle driving patterns. Powerful Software Provides Diverse Simulation Modes Comprehensive Battery Simulation It can simulate the output and charge/discharge characteristics of various battery packs such as lithium manganate, lithium cobalt, lithium iron phosphate, nickel-hydrogen, ternary lithium, lithium titanate and lead-acid batteries, and can set the parameters such as serial/parallel quantity, temperature, SOC, internal resistance and single battery capacity to simulate the output characteristics of the whole battery pack. The power supply opens first, second and third-order RC battery models and supports user-defined battery parameters and import of CSV user-defined model. PV Simulation Titan DC series is a DC power supply featuring high precision, high dynamics and high-speed switching. With the complete I-V curve simulation function, it can simulate the output characteristics of various VP panels, and provide various kinds of user- defined curves, static and dynamic I-V curves and shadow occlusion simulations. The programming function can simulate different waveform outputs through three programming modes like Step, List and Wave, in order to fulfill the test requirements of various industries. The power supply can not only provide standard power supply environment for electrical equipment, but also receive the energy from load and feed ti back to the grid, with feedback efficiency of above 94%, to save energy and improve the test environment. Electronic Load Titan DC series feedback DC electronic load is different from the traditional consumption load. It feeds back the absorbed electric energy to the power grid after transformation to save energy and improve the test environment. The product adopts full digital control technology, and has characteristics such as step-less adjustment, high accuracy, high dynamic performance and high reliability. It meets the requirements of low voltage and high current test, and can be applied to test scenarios such as fuel cell stack and fuel cell engine system. Titan DC series is regenerative DC electronic loads capable of absorbing current and efficiently feeding it back into the power grid. The series achieves animpressive efficiency of up to 94%. the returned eletrical energy can be reused by other equipment within the facility, resulting in savings in overall energy consumption and carbon emissions, reducing the environmental impact. KEY FEATURES DC Output Voltage : 20-2000Vdc - High Dynamics : <2ms (10~90%) - Output slow start - Low Harmonic Current: <3% F.S. - Anti-revers function - Online insulation impedance monitoring - Discharging resistor - Capacitance compensation PDF DATASHEET