Circuit One D Force 1

Circuit One D Force 1 – 3DOF Haptic Motion System The Circuit One D Force 1 brings real chassis movement and high-frequency haptic detail into a single cockpit upgrade. Built around four actuators, it reproduces 3DOF motion — pitch, roll and heave — while layering fine vibration on top, so kerbs, grip loss and surface texture come through your seat rather than just your screen. Each actuator combines chassis movement and high-frequency haptic vibration in one unit, driven by an integrated low-inertia spindle servo. The result is a motion platform that feels fast and detailed, with a CNC-machined aerospace-grade aluminium build designed to bolt straight onto a standard 8020 aluminium-profile cockpit. Key Features 3DOF motion system with four actuators delivering pitch, roll and heave. Combined chassis movement and high-frequency haptic vibration in every actuator. Integrated low-inertia spindle servo drive for fast, precise response. CNC-machined aerospace-grade aluminium alloy construction. RGB lighting that links to telemetry — events such as ABS, traction control or flags can be mapped to colour and blink patterns. Telemetry-driven and managed through the free Circuit Manager software for Windows. OTA firmware updates handled directly from Circuit Manager. Technical Specifications Configuration: 3DOF motion system, 4 actuators Drive unit: integrated low-inertia spindle servo Travel: 50 mm Maximum speed: 150 mm/s Frequency range: 0–100 Hz Maximum load capacity: up to 180 kg per actuator (per axis) Material: CNC-machined aerospace-grade aluminium alloy Dimensions per actuator: 139.7 × 95 × 257 mm Weight per actuator: 3.55 kg Power per actuator: 200 W Input voltage: 110–220 V Operating temperature: 0–40 °C Lighting: RGB, linkable to telemetry Connection: USB + power cable Firmware: OTA updates via Circuit Manager Compatibility and Setup Notes The D Force 1 is a PC-only system and runs on Windows. It is not compatible with PlayStation or Xbox. The free Circuit Manager app is required on Windows to run the system, and it brings ready-made presets, per-axis adjustment, RGB telemetry mapping, a built-in game launcher and OTA firmware updates. Installation is designed for standard 8020 aluminium-profile cockpits. The actuators mount with M8 × 20 mm hardware and the LINK box with M4 × 14 mm — 8 screws and no adapters on a standard 8020 profile. Each axis uses a single, non-polarized cable that can be connected in either orientation, which keeps assembly straightforward and reduces wiring errors. Important Notes Windows PC only — no console support (PlayStation / Xbox). Circuit Manager software (Windows) is required to operate the system. Maximum load figures are stated per actuator / per axis, not as a single total payload. Designed for standard 8020 aluminium-profile cockpits. Support and Downloads Software, firmware and resources for the D Force 1 are available from Circuit One: circuitone.com. You can also find software and manuals on our downloads page: The French Simracer — Software & Manuals.