Goulds Convertible Jet Pumps - J+, JRD and HSJ Series

Description Goulds Water Technology Convertible Jet Pumps NSF-certified convertible jet pumps for shallow OR deep wells — J+, JRD and HSJ series. 0.5–2 HP, cast iron, single phase. NSF/ANSI 61 & 372 Convertible J+ · JRD · HSJ 0.5–2 HP Shallow & Deep Built in USA Overview Goulds convertible jet pumps run on shallow wells (to 25 ft) with a bolt-on shallow well adapter, or deep wells (over 25 ft) with a twin-pipe or packer jet assembly and pressure control valve — using the appropriate Goulds fittings. This listing covers three series: the J+ (0.5–1.5 HP), the value JRD (0.5–1 HP), and the multi-stage HSJ (0.75–2 HP) for higher capacity and pressure at depth. All NSF/ANSI 61 & 372 certified. Select your series and horsepower from the options above. Key Features Convertible Runs shallow or deep well with the appropriate Goulds fittings. Serviceable Back pull-out design, two-compartment motor, and nozzle clean-out plug. FDA-Compliant Impeller Glass-filled engineered composite — corrosion and abrasion resistant. Multi-Stage Power (HSJ) Multi-stage design delivers high capacity at greater pressures and depths. Stainless Steel Build (HSJ) SS hex shaft, wear rings and coverplates for durability. Corrosion Resistant Electro-coat paint baked on inside and out. Protected Mechanical Seal Diaphragm retains water in the casing so the seal can never run dry. NSF Listed Certified to NSF/ANSI 61 & 372 for drinking water systems. Specifications Pump Type Convertible jet (shallow or deep well) Suction Connection 1¼? NPT Discharge Connection 1? NPT Drive (Pressure) Connection 1? NPT Pressure Switch AS4 preset 30–50 PSI (HSJ 2 HP: AS10) Motor NEMA standard, 60 Hz, 3500 RPM, single phase, capacitor start Voltage 115/230 V (HSJ 2 HP: 230 V only); built-in overload with automatic reset Shaft / Rotation Stainless steel; clockwise viewed from motor end Maximum Temperature 140°F (60°C) Casing Cast iron, electro-coat finish Agency Listings NSF/ANSI 61 & 372, CSA (HSJ also UL listed) Models in This Listing Series Model HP Stages Weight Notes J+ J5 0.5 1 50 lb* Shallow or deep well J+ J7 0.75 1 55 lb* Shallow or deep well J+ J10 1 1 59 lb* Shallow or deep well J+ J15 1.5 1 68 lb* Shallow or deep well JRD JRD5 0.5 1 37 lb Value line JRD JRD7 0.75 1 42 lb Value line JRD JRD10 1 1 47 lb Value line HSJ HSJ07N 0.75 2 53 lb Multi-stage, high pressure HSJ HSJ10N 1 2 58 lb Multi-stage HSJ HSJ15N 1.5 3 72 lb Multi-stage HSJ HSJ20N 2 3 75 lb Multi-stage, 230V only *J+ weight includes shallow well adapter. Performance J+ Peak Capacity Up to 26 GPM (shallow well) JRD Peak Capacity Up to 22 GPM (shallow well) HSJ Peak Capacity Up to 28 GPM (shallow well) Deep Well Over 25 ft with a twin-pipe or packer jet assembly + pressure control valve Detailed Ratings See the Technical Brochure for shallow well, twin-pipe and packer GPM by depth. ? Confirm Before Ordering Tubing ships configured for shallow well use. Deep well setups require a twin-pipe or packer jet assembly, a pressure control valve, and a JDW fittings package or AV22 kit for the pressure-switch connection. Shallow well use requires the shallow well package. A pressure tank is required on all systems. HSJ 2 HP is 230 V only. Verify series, HP and voltage before ordering; never run the pump dry. """ Ready to Order? Confirm HP and your well type before placing your order. Shop Watermainsupply.com 281.664.8000 sales@watermainsupply.com © Watermain Supply — A division of E4 Industrial LLC """ Data Sheet Data Sheet Product Data SheetManufacturer brochures with features, materials, ratings and dimensions for the series in this listing. Pump Data Sheet Technical Details Technical Details Technical BrochureFull technical brochures — applications, specifications, performance ratings, fittings and agency listings. Pump Technical Details Instruction Manual Instruction Manual Installation, Operation & Maintenance ManualOfficial Goulds Water Technology Jet Pump IOM (Doc. IM102R13) — system selection, piping, wiring, priming and service. Pump Instruction Manual