PREMIUM ROOF AND WALL COAT

Long-life acrylic roof and wall paint. Between the blistering summer sun, coastal air and sudden downpours, your roof and walls work harder than almost any surface on your property. Rhinoluxe Premium Roof and Wall Coat is a new-generation acrylic made to keep up. Whether you are a homeowner refreshing tired tiles or a contractor coating an IBR warehouse, it rolls on smoothly, holds its colour for years, and seals the surface. Goes on clay and concrete tiles, fibre-cement board, primed IBR sheeting and corrugated iron, and primed plaster and cement walls. Key Benefits Stands up to the African sun. UV-stable pigments keep your colour looking rich rather than faded and chalky, season after season. Protects for up to 10 years. Applied correctly over a well-prepared surface, it keeps working for a decade or more — so you repaint far less often. Flexible and waterproof. The film stretches with a roof's daily heat-and-cool instead of cracking, while staying highly water-resistant to keep the wet out. Easy to live with. Low-odour, dirt-shedding (rain helps rinse it clean) and fast-drying — two coats can go on in a single day. Technical Overview At its core is an acrylic resin emulsion chosen for elasticity and adhesion across both porous and non-porous surfaces. Applied in 2–3 coats to build a 100–120 micron dry film, it forms a continuous, breathable membrane that moves with thermal expansion rather than cracking. UV-stable pigments resist fading and chalking, the dirt-shedding surface discourages algae and mould, and the water-based formula keeps VOC levels low in line with EU regulations — easier on the applicator and the environment. Specifications Resin Base Acrylic Resin Emulsion Spreading Rate 8 m²/L per coat (approx. 2 m²/L first coat on new tiles) Film Thickness 30–40 microns per coat; 100–120 microns DFT total Drying Time Touch-dry 1hr, hard dry 4–6hrs, overcoat after 2hrs Recommended Coats 2–3 coats Life Expectancy Up to 10 years (substrate and film thickness dependent) Colour Range Grey White, Traffic White, Light Ivory, Beige, Grey Beige, Signal Grey, Basalt Grey, Anthracite Grey, Black, Beige Red, Oxide Red, Copper Brown, Chocolate Brown, Moss Green, Heritage Green — or tinted to your specification (RAL colour matching available) Flammability Non-flammable, low VOC Packaging Sizes 1L, 5L, 20L Complementary Products Cleaning Preparation: Rust Remover, Industrial Degreaser, Allrite MPC Wall Preparation: Multiprime, Alkaline Plaster Primer. Metal Preparation: ZP4 Primer, Zinc Phosphate Primer. Waterproofing Preparation: Sealflex, Sealflex Fiber. Technical Guidance A little timing goes a long way. Stir the paint to a smooth, creamy consistency and apply it un-thinned — adding water only weakens the colour and coverage. Work in the cooler, shaded parts of the roof early in the morning or late in the afternoon, and avoid painting between 10am and 2pm or when rain is expected within 4–6 hours. New cement or clay tiles are thirsty, so dampen them first and expect the first coat to use more product. If there is rust, take the metal back to bright steel with Rhinoluxe Rust Remover and prime with Zinc Phosphate Primer before you start coating.