700c (ETRTO 622×22) Carbon Fibre Road Wheelset – Center Lock Disc – QR / Thru Axle – 8/9/10/11/12 Speed – HG / XDR / Microspline – Tubeless Compatible – 1480g

Brand - Madspeed7 Premium quality 700c (ETRTO 622x22) carbon road bike wheelset Precision 100% hand built wheels Choice of freehub - HG, SRAM XDR or Shimano Microspline Choice of axle/hub type – QR or Thru Axle Suggested maximum system weight of 125kg (total weight of fully kitted up rider, bike and luggage) Wheelset weight – 1480g Please note QR stands for standard quick release axles. For thru axle wheels, the 12mm maxles are not supplied. For the QR wheels, standard QR skewers will be supplied. If you are unsure of anything on this listing, please contact us and we will respond promptly. Rims Lightweight T800 carbon fibre construction Asymmetrical rim with a 2.5mm offset for more equalised tension 44mm deep profile Hooked 22mm internal profile is optimised for 28-32mm tyres (Tyres up to 25-50mm can also be safely used) All matte finish Clincher / Tubeless Compatible (can be run either with standard clinchers or road tubeless tyres. Tubeless rim tapes and valves are NOT supplied) Beadlock feature locks the tyre bead to the rim, preventing tyre slippage or air loss whilst riding 2 water drainage holes (one on each side of the rim) allow accumulated water inside the rim to drain out, thus enhancing the performance of the wheels Presta valve holes Hubs Premium quality Taiwan sealed bearings hubs Front hub 2 sealed bearings, rear hub 4 sealed bearins High grade TPI precision sealed bearings from Taiwan - Upgraded to LU/LB seals which are low friction on the inside and provide maximum sealing on the exposed faces Sealed cartridge replaceable units 120 points of freehub engagement (3-degree engagement), 6x2 pawls (each pawl has 2 teeth for quick engagement and durability HG freehub - Compatible with HG-standard 8-12 speed cassettes Microspline freehub - Compatible with Shimano Microspline-standard 12 speed cassettes XDR freehub - Compatible only with SRAM XD/XDR-standard 11/12 speed cassettes For 9x100mm & 12x100mm fork dropouts For 10x135mm & 12x142mm frame dropouts Centre lock disc mount for centre lock rotors (6-bolt rotors will require an adapter. Adapter is NOT supplied) Spokes Pillar PSR XTRA 2.2-2.0/0.95-2.0 Aero butted profile (2.2 mm at the head for the patented Pillar Spoke Re-enforcement) The Pillar Spoke Reinforcement (PSR) puts more material at the spoke head, just before the J-Bend to prevent failure in this stress area Pillar PSR patented spokes are four times stronger than standard spokes Made from high grade T302 (18/10) stainless steel wire by Sandvik Sweden Black stainless treatment 24 front spoke count, in a 2 cross lacing pattern 28 rear spoke count, in a 3 cross lacing pattern 16mm length aluminum nipples paired with washers for a stronger rim connection (Washers increase the bearing surface area, spreading the stress over a larger area of the rim. They also reduce friction, which makes for easier & more precise truing) J-bend spokes allows for easy sourcing and replacement