Gigabit Ethernet Cable over MPO Fiber – 1Gbps Full Speed | Up to 300m (984ft) | 1000Base-T Detachable TX/RX

Made to order, takes 12-18 days to ship Gigabit Ethernet When Copper Gives Up, Fiber Takes Over CAT6 cable maxes out at 328 feet (100 meters). After that, your signal degrades, your speeds drop, and your network becomes unreliable. This system doesn't have that problem. Run a full 1 Gbps network connection up to 300 meters (984 feet) with zero signal degradation, zero EMI interference, and zero compromises. Over fiber. It's not just a longer cable. It's a fundamentally better way to move data across a building. What This System Includes 1. MPO Fiber Cable 7-core fiber optic cable ultra-slim at 3.0mm diameter Armored LSZH jacket: crush-resistant, flame-retardant, built for conduit runs No active electronics in the cable pure fiber. Nothing to fail mid-run. 2. TX Adapter (Transmitter) source end Connects to your switch, router, or NAS via standard RJ45 Converts your Ethernet signal into fiber light for transmission 3. RX Adapter (Receiver) destination end Connects to your remote device, access point, or switch via standard RJ45 Reconverts fiber signal back to standard Gigabit Ethernet How it works: Run the fiber cable through walls, conduit, or ceiling. Plug in the TX at the network source. Plug in the RX at the destination. Your devices see a standard Gigabit connection they never know it's fiber. Why Not Just Use a Longer CAT Cable? Because physics won't allow it. Copper Ethernet hits a hard wall at 328 feet after that, signal loss is unavoidable. Fiber has no such limit. Here's what you get instead: Full 1 Gbps speed at any supported distance no slowdown at 200m vs 30m Complete EMI immunity fiber carries light, not electricity. Factories, hospitals, broadcast environments none of it affects the signal No ground loop issues fiber is electrically isolated between both ends Replace just the TX or RX adapter if needed not the entire cable run Slim 3.0mm cable threads through conduits that bulky copper cable cannot What It Delivers Speed: 1000 Mbps / 1 Gbps (full Gigabit) Standards: 1000Base-T IEEE 802.3ab, 100Base-T IEEE 802.3u, 10Base-T IEEE 802.3 Energy Efficient: IEEE 802.3az-2010 (EEE) compliant Interface: RGMII Connector: Standard RJ45 on both ends plug-and-play with any device Max Distance: 300 meters (984 feet) Gold-plated connectors: Better conductivity for stable, long-term signal transmission Built for Real Installations Armored 3.0mm cable rated for conduit, in-wall, and direct-burial runs LSZH jacket low-smoke, zero halogen, safe for commercial and public buildings Full EMI immunity immune to motors, fluorescent lighting, RF equipment, and industrial machinery Electrically isolated no ground loop risk between buildings or floors Operates in extreme temperature environments data centers, outdoor enclosures, warehouse floors Where This Gets Used Office buildings: switch room to workstations or APs ( Access Points ) on distant floors Warehouses & factories: IT closet to floor-level terminals across the facility Broadcast & live events: network backbone across large venues or stages Security systems: NVR ( Network Video Recorders ) to IP cameras at long distances without signal loss Healthcare: reliable isolated network runs between wings or buildings Campuses & schools: building-to-building connections without dedicated fiber infrastructure Home & estate: main router to outbuildings, garages, or remote access points Technical Specifications Speed: 10 / 100 / 1000 Mbps (auto-negotiating) Standard: IEEE 802.3ab (1000Base-T), IEEE 802.3u (100Base-T), IEEE 802.3 (10Base-T) Energy Efficiency: IEEE 802.3az-2010 compliant Interface: RGMII Connector Type: RJ45 (standard, gold-plated) Fiber Type: MPO 7-core, A polarity, PC end face, F-F Cable Diameter: 3.0mm Cable Jacket: LSZH, Armored Max Distance: 300m / 984ft Your network doesn't stop at 100 meters. Neither should your cable. Install it once. Run Gigabit anywhere.