AT-RS10D | 10 Channel Digital Wireless Microphone System with 10 Handhelds, 10 Headsets, 10 Lavalier Mics, 10 Bodypacks

FREE SHIPPING! Ten Channels. Three Microphone Options. One Complete Digital System. The Airwave Technologies AT-RS10D is a complete 10-channel digital wireless microphone system built for rental companies, production teams, houses of worship, schools, theaters, event venues, and other applications that demand flexibility without the hassle of assembling multiple components. The system combines five AT-6200D dual-channel digital receivers to provide ten channels of clear, dependable wireless audio. Each channel can be configured for handheld, lavalier, or headset use, giving operators the freedom to adapt the system to different events, presenters, performers, and production requirements. The AT-RS10D includes ten U-61D digital handheld microphones and ten U-62D digital bodypack transmitters. Each bodypack can be paired with one of the included LAV-2 lavalier microphones or HSD-SLIMLINE+SE single-ear headsets. This gives you three microphone options for every channel while keeping the system organized as one complete package. One transmitter is used on each channel at a time. Digital transmission and 24-bit audio conversion provide clean, detailed sound with reduced background noise. Automatic frequency scanning and infrared synchronization help streamline setup, while individual channel controls allow each voice or microphone style to be adjusted independently. All five receivers and the system’s rack components are installed in a rugged 14U flight case for organized storage, protection, and transportation. Instead of piecing together receivers, transmitters, microphones, cables, and accessories for every job, the AT-RS10D keeps a complete ten-channel wireless solution ready to deploy. For rental inventories and venues that need maximum versatility, the AT-RS10D delivers ten channels, three microphone options per channel, and one streamlined system built to handle a wide variety of professional audio applications. Key Features Complete 10-channel digital wireless system Five AT-6200D dual-channel digital receivers Ten U-61D digital handheld microphones Ten U-62D digital bodypack transmitters Ten LAV-2 lavalier microphones Ten HSD-SLIMLINE+SE single-ear headsets Handheld, lavalier, or headset options for every channel 24-bit digital audio conversion Automatic frequency scanning Infrared transmitter synchronization Independent receiver-channel controls 300' Line-of-sight operating range Professional rack-mounted configuration Rugged 14U flight case Designed for transportation, storage, and repeated setup Ideal for rental companies, events, schools, theaters, venues, and houses of worship Included in the System 5 AT-6200D dual-channel digital wireless receivers 10 U-61D digital handheld microphones 10 U-62D digital bodypack transmitters 10 LAV-2 lavalier microphones 10 HSD-SLIMLINE+SE single-ear headset microphones 1 14U flight case 2 ANT001 Antenna Distro 1 AT-OMNI Antenna Power conditioner with lights Required rack components and system accessories *Microphone Stand for AT-Omni Antenna Not Included AT-6200D Wireless Microphone Receiver Features RF Frequency Range: 470~510Mhz, 512~562MHz Digital Modulation Mode: QPSK Digital Audio Resolution: 24-bit A/D Conversion Dynamic Range: 120dB (A-Weighted) Frequency Response: 50Hz-18KHz (#3dB) Signal to Noise Ratio: >95dB (A) System Distortion: <0.1 % (THD+N @ AF 1KHz) Noise Floor: <-93dBV (A) XLR Maximum Output: +5dBV‡1 AF System Gain: +15dB+1 Gain Control Range: 0 to 63dB per 1dB Step Audio Output: XLR CH1 & CH2 / XLR Mix / 1/4" Mix Impedance: XLR: 3KO / 1/4-inch connector: 3KO System Operating Range: ≤300' Antenna Connectors: 2 BNC 1/4 Wave Rear Mount Power Requirements: 12V/0.5A DC Power Consumption: <500mA @ DC12V Operating Temperature Range: 28°F- 122°F Dimensions: 16.142" (L) x 6.299"' (W) x 1.732" (H) Weight: 3.71 lbs. AT-U61D Handheld Microphone Transmitter Specifications Digital Audio Resolution: 24-bit A/D Conversion Interchangeable Capsule Infrared Data Synchronization Frequency Range: 470~510MHz, 512~562MHz Dynamic Range: 110dB (A-Weighted) Max SPL: 140dB Capsule Frequency Response: 50Hz-16KHz (#3db) Capsule Sensitivity: -50dB ÷ 2dB V/PA@1 KHz Capsule Directivity: Single Point Signal to Noise Ratio: >100dB (A) RF Output Power: H-15dBm M-10dBm L-5dBm (@‡2) Gain Adjustment Range: 0/ -3/-6/-9 dB Power Requirements: <190mA@3.OV- 2 x 1.5V (AA) Battery Life: >8H/1300mAH Dimensions: 9.51" x 1.97" Weight: 10.37oz AT-U62D Handheld Microphone Transmitter Specifications Digital Audio Resolution: 24-bit A/D Conversion Infrared Data Synchronization Durable Metal Body Construction Frequency Range: 470~510MHz, 512~562MHz Dynamic Range: 120dB (A-Weighted) Frequency Response: 50Hz-15KHz (‡3db) Gain Adjustment Range: 0 / -3/-6/ -9 dB Input Impedance: 5KO RF Output Power: H-15dBm M-10dBm L-5dBm (@‡2) Harmonic Rejection: >50dB Display: LCD Power Requirements: < @3.OV- @3.OV- x x ( A A ) Battery Life: >10H/1300mAH Dimensions: 6.5" x 2.56" x .91" Weight: 3.77oz AT-6200D Series Manual Link When using up to two dual-channel receiver units (maximum of four channels) within the same frequency range, an Antenna Distribution System (Antenna Distro) is generally not required under normal operating conditions. When using three or more dual-channel receiver units (six or more channels) within the same frequency range, an Antenna Distribution System, such as the Airwave ANT001-SYS, is required. Wireless Microphone Systems for Every Need At Airwave Technologies, we have a variety of wireless microphone systems and product packs available containing convenient features and pro worthy audio, all at an affordable price point. If you are interested in a wireless mic system, Airwave Technologies is here to assist you.