Purewell Portable RO Water Purifier – 0.0001μm Filtration, Removes PFAS & 1000+ Contaminants

Product Overview 01 Product Name Portable RO Water Filter System A rechargeable reverse osmosis purification system designed for camping, RV travel, off-grid use, and emergency preparedness. Model No. K8680 Portable electric RO purification system with TDS monitoring, UV treatment, lighting, and multiple water connections. Filtration Level 10-Stage Filtration Combines pre-filtration, activated carbon, RO membrane filtration, and UV treatment. Desalination Rate 95% Designed to reduce dissolved solids in general outdoor freshwater sources. Pure Water to Waste Water 2:1 The stated ratio is based on the operating specification provided in the product manual. Product Size 240 × 125 × 315 mm Approximately 9.45 × 4.92 × 12.40 inches. Net / Gross Weight 9.3 lb / 13.7 lb Suitable for vehicle-supported camping, RV travel, group outdoor use, and emergency storage. Water Source General Outdoor Freshwater Sources Use the clearest available freshwater source whenever possible to support better flow and longer filter life. Water source notice: This system is designed for general outdoor freshwater sources. It is not intended for seawater, chemically contaminated water, industrial wastewater, or water outside the recommended temperature range. RO Filtration & UV Treatment 02 Multiple Layers of Treatment in One Portable System The K8680 combines a reusable intake pre-filter, PP cotton, activated carbon, an RO membrane, and UV treatment. Each component performs a different role before purified water reaches the blue PURE outlet. Complete System 10-Stage Water Treatment Multi-stage treatment helps manage visible debris, sediment, taste, odor, dissolved solids, and microorganisms in outdoor freshwater sources. Pre-Filter PP Cotton Activated Carbon RO Membrane UV Treatment Pre-Filter Stainless Steel Mesh Helps block larger debris such as twigs, leaves, weeds, and other visible materials before water enters the system. Reusable Large Debris Outdoor Intake Clean and maintain regularly Pre-Filter Layer Medical-Grade PP Cotton Helps capture particles larger than 5 μm, including micro-sediment, rust, insect eggs, and mineral debris. >5 μm Particles Rust Sediment Rated capacity: up to 500 gallons RO Cartridge Layer Activated Carbon Helps reduce color, chlorine, unpleasant taste, odor, synthetic detergents, and selected organic substances. Chlorine Reduction Taste Improvement Odor Reduction RO Cartridge Layer Reverse Osmosis Membrane Supports high-precision purification and helps reduce dissolved solids, selected heavy metals, PFOA, PFOS, and other listed contaminants. TDS Reduction RO Purification High Precision Rated capacity: up to 3,000 gallons Final Treatment UV Germicidal Lamp Provides an additional treatment stage targeting bacteria and viruses while the system is operating. UV Treatment Automatic Operation Service life listed as lifetime in the manual Filter life note: Actual cartridge life varies according to source-water quality, TDS level, sediment load, filtered volume, and maintenance. Monitor the purified-water TDS reading and replace the cartridge earlier when filtration performance decreases. Power, Runtime & Lighting 03 Battery Capacity 5200 mAh Built-in rechargeable battery supports portable filtration away from a fixed power supply. Runtime Up to 6.5 Hours Runtime is based on the product specification and may vary with operating conditions. Charging Time Approximately 2–3 Hours Recharge through the built-in Type-C charging connection. Voltage / Current 24V / 10A Use the matching power charger specified for the system. Type-C Function Forward & Reverse Charging Supports charging the purifier and supplying emergency power to compatible external devices. Lighting Power 10W / 24V Built-in lighting supports night use and outdoor emergency situations. Lighting Brightness 1000 Lumens Includes a standard lighting mode and an SOS flashing mode. Compliance Listed in Manual CE / FCC / RoHS / UL Compliance references are listed in the product specification section of the manual. Smart Display & System Monitoring 04 See Water Quality and Operating Status at a Glance The front control display shows raw-water TDS, purified-water TDS, battery level, flushing status, water-production status, UV operation, and service reminders. F Flush Automatic Cleaning Automatic flushing starts when the purifier is powered on and finishes when the indicator turns off. R Raw Water TDS Monitor Source Water Displays the TDS level of the incoming raw water source. P Pure Water TDS Monitor Filtered Water Displays the TDS level of the purified water after filtration. UV Sterilize UV Operating Status The UV indicator remains on while the UV treatment system is operating normally. W Produce Water Filtration Status The water-production indicator remains on during normal filtration operation. B Battery Remaining Power Displays the remaining battery level for better outdoor-use planning. A Full Water Pressure Valve Response The built-in pressure valve responds when the purified-water outlet is opened or closed. E1 Recondition Service Reminder A flashing service light may indicate an internal component fault requiring inspection. Hold 3 Seconds Power On or Off Press and hold the main button for three seconds. Press Once Start or Stop Filtration Use one short press while the system is powered on. Press Twice Turn the Light On or Off Two short presses control the built-in work light. Press 3 Times Turn SOS Mode On or Off Three short presses activate or deactivate the SOS light. Water Connections 05 White Pipe · RAW Draw Water from the Source Connect the white pipe to the reusable pre-filter, place the intake in the raw-water source, and connect the opposite end to the RAW inlet. Blue Pipe · PURE Collect Purified Water Connect the blue pipe to the PURE outlet and direct it to the included faucet or a clean water container. Red Pipe · DIRTY Drain Concentrated Water Connect the red pipe to the DIRTY outlet and direct the opposite end to an appropriate drainage location. Initial-use procedure: Check that all pipes and seals are securely installed. After inserting the RO cartridge, power on the system and allow it to operate for approximately 30–60 seconds to rinse the RO membrane before collecting drinking water. Care, Replacement & Use Notes 06 01 Use Water Within the Recommended Range Raw-water temperature should remain between 41°F and 100°F / 5°C and 38°C. 02 Operate in a Suitable Environment Recommended environmental temperature is 40°F–104°F / 4°C–40°C. 03 Backflush the Pre-Filter Monthly Regular pre-filter cleaning helps reduce blockage and supports more stable water intake. 04 Replace PP Cotton as Needed The manual recommends replacement approximately every 3–6 months, depending on source water and usage. 05 Replace the RO Cartridge on Time The manual recommends approximately every 6–12 months, or earlier when TDS rises or filtration performance declines. 06 Do Not Open or Wash the RO Cartridge The RO cartridge is replaceable and should not be internally cleaned or disassembled. 07 Keep the Charging Port Dry Do not pour water or other liquids into the Type-C charging connection. 08 Do Not Submerge the Machine Clean the exterior carefully without immersing the electric purification system in water. 09 Avoid Abrasive Cleaning Materials Do not use steel wool, abrasive cleaners, gasoline, acetone, or other corrosive liquids. 10 Prepare Properly for Long-Term Storage Drain the system, remove the filters, allow all parts to air-dry, and store in a cool, dry place. 11 Residual Water Can Be Normal A small amount of water may remain after factory pressure, water-flow, and UV testing. 12 Check Connections Before Every Trip Inspect the cartridge, seals, quick-connect fittings, pipes, and outlets before operation. Replacement guidance: Rated gallon capacity and recommended replacement months are reference values. Source-water quality, sediment, daily consumption, TDS level, temperature, and maintenance can shorten or extend the actual service period.