Antigravity A1 Full-Coverage Propeller Guards

Upgraded full-coverage propeller guards for the Antigravity A1. The guards fully enclose all four propellers for extra protection and peace of mind in flight, and are recommended for low-altitude flying, Follow Me shots and complex environments.Every Shot, CoveredWith the propellers fully enclosed and A1's omnidirectional obstacle avoidance working alongside them, you can track through forests, fly in tight spaces and get close-up shots with more confidence.Smart Fit, Seamless ProtectionThe guards are designed to sit securely on A1 and stay firmly in place, while remaining invisible in 360 footage for clean, unobstructed views in every direction.Specifications Total weight: 36 g (1.27 oz) Radius: 88 mm (3.46 in) Maximum dimensions: length 410 mm (16.1 in), width 335 mm (13.2 in), height 65 mm (2.6 in) Compatibility: Antigravity A1 In the BoxPropeller Guard Set × 1Notes Installing the Full-Coverage Propeller Guards increases A1's takeoff weight to over 249 g. Always check and comply with local laws and regulations before flight. Flight time may be reduced with the guards installed. For longer flight time, pair them with the High-Capacity Flight Battery. With the guards installed, A1 automatically limits its maximum flight speed to 11 m/s (25 mph). Do not use the Antigravity Cellular Module together with the Full-Coverage Propeller Guards; doing so may affect flight performance and safety. The guards may affect flight performance. In high-temperature environments, prolonged hovering while recording in 8K/30fps may trigger thermal protection and cause A1 to land automatically. Avoid prolonged hovering and keep an eye on the drone during flight. The guards may affect flight and transmission performance. Fly at an appropriate speed and monitor the transmission signal. With any controller, maximum flight altitude is 50 m (164 ft) and maximum flight distance is 200 m (656 ft).