Aidite Cameo Glass Ceramic CAD/CAM Blocks

Aidite cameo · Glass Ceramic CAD/CAM Blocks Glass ceramic blocks for efficient chairside and lab all-ceramic restorations. Aidite cameo Dental Glass Ceramic is a CAD/CAM block for chairside and lab all-ceramic restorations. According to Aidite, it is easy to mill, and its crystallization process takes only about 20 minutes. The production process is precisely matched to CAD/CAM systems for efficient, instant restorations, with good transparency for a natural-looking result. In-stock orders ship the same business day before 4 PM ET FREE Shipping No Handling Fees Trusted by dental professionals across the U.S. Aidite cameo glass ceramic CAD/CAM blocks with metal mandrels. Quick Specifications The essential details at a glance. 400 ± 60 MPaThree-point bending strength ≈ 20 minCrystallization process, according to Aidite 20 shadesVITA 16 plus 4 bleach shades HT & LTTwo translucency levels, 18 x 13 x 15 mm block Specifications Item Detail Shades VITA 16 (A1–A4, B1–B4, C1–C4, D2–D4) and 4 bleach shades (BL1, BL2, BL3, BL4) Translucency HT (high transparency), LT (low transparency) Block size 18 x 13 x 15 mm Package Package of 5 blocks Mandrels Several mandrel types are available to fit a range of milling machines Physical properties Property Value Coefficient of thermal expansion (25–500 °C) 10.5 ± 0.5 x 10-6/K Three-point bending strength 400 ± 60 MPa Chemical solubility ≤ 40 µg/cm² Density 2.47 ± 0.05 g/cm³ Values are from Aidite's product brochure. Follow the manufacturer's current Instructions for Use for each case. Why Labs Choose It Strength, fit, and a fast digital workflow. Mechanical strength400 ± 60 MPa bending strength Aidite says this allows the CAD/CAM system to design with higher accuracy, makes ultra-thin veneers and other restorations easier to process, and improves the strength and safety of the seated restoration. Fit and seatingStable edges, accurate structure Aidite says the nano-micron crystallization structure gives better edge stability and structural accuracy during milling. This simplifies repeated seating and polishing and helps restorations fit efficiently. Natural hardnessHardness close to natural teeth Aidite says cameo glass ceramic is closer in hardness to natural teeth than other material types. This can reduce excessive wear on the opposing teeth caused by a hardness difference and limit abrasion of the restoration and neighboring teeth. Instant restorationNear-zero shrinkage An all-ceramic material with a shrinkage ratio close to zero, for efficient design and digital processing combined with a rapid crystallization process. See the material and restoration characteristics. Milled cameo veneer still attached to the block.Finished cameo veneers on a dental model.Micro- and nano-scale crystal structure (SEM image). Translucency Selection Choose HT or LT based on the case. HTHigh transparency Good light transmission that restores the color and texture of the natural abutment. LTLow transparency Lower light transmission for masking. Available in 20 shades: VITA 16 (A1–A4, B1–B4, C1–C4, D2–D4) and 4 bleach shades (BL1–BL4), each in HT and LT, in an 18 x 13 x 15 mm block. Choose shade, translucency, and package quantity above. Indications Indicated all-ceramic restorations. According to Aidite's product brochure, cameo glass ceramic is indicated for: Veneers Inlays Onlays Anterior crowns Posterior crowns Full crown bridges Follow the manufacturer's current Instructions for Use and the clinician's case-specific requirements. Crystallization Programs Standard and fast crystallization. Reference programs from Aidite's product brochure. Standard crystallization Start temp Drying time Heating rate Highest temp Holding time Final temp 450 °C 4 min 40 °C/min 840 °C 2 or 6 min 500 °C Fast crystallization Start temp Drying time Heating rate Temp Holding time Heating rate Highest temp Holding time Final temp 403 °C 18 s 90 °C/min 820 °C 10 s 30 °C/min 840 °C 2 or 6 min 700 °C Reference values from Aidite's product brochure. Confirm the current Instructions for Use and validate the program for your furnace. Tables scroll sideways on small screens. Complete the Workflow Finish glass ceramic restorations with greater control. Stain & Glaze Explore finishing materials for characterization, value control, surface refinement, and the final glazed restoration. Shop stain and glaze products → Glass Ceramics Compare the glass ceramic CAD/CAM blocks available at Gro3X. Shop glass ceramics → Choose the shade, translucency, and package quantity above. Aidite cameo glass ceramic gives dental labs and chairside teams a fast-crystallizing CAD/CAM option for veneers, inlays, onlays, crowns, and full crown bridges.