Vessel 220USBS1U e-ASSIST Higher-Speed Screwdriver w/ Impact Ball 11-Pc Bit Set & BALL GRIP Ratchet Screwdriver Set

Vessel e-ASSIST Higher-Speed Screwdriver w/ Impact Bit Set & Ratchet Driver | Tool Nut Key Features Three Driving Methods in One Kit Pairs a USB-rechargeable e-ASSIST powered screwdriver with a 36-tooth ratchet screwdriver and an impact-rated bit set — powered, manual-ratchet, and impact driving covered without buying three separate tools. 1,200 RPM Higher-Speed Drive The e-ASSIST driver in this kit is Vessel's Higher-Speed model, spinning fasteners home at up to 1,200 RPM — rated 4x faster than Vessel's standard 220USB — for the fastest repetitive small-screw work in the lineup. 2 Drivers, 21 Bits Total The e-ASSIST driver ships with its own Impact Ball bit, the ratchet screwdriver includes 10 bits in a BITSBELT holder, and the IB11P02U set adds 11 more impact-rated bits — Phillips, slotted, square, and Torx covered. Overview This bundle pairs the Vessel 220USBS1U e-ASSIST Higher-Speed Screwdriver with the Vessel IB11P02U Impact Ball 11-Piece Impact Driver Bit Set and the Vessel 2200MBH120K01 BALL GRIP Interchangeable Ratchet Screwdriver — a fast powered driver, an impact-ready bit set, and a manual ratchet driver together in one kit. Model Numbers: 220USBS1U (USB-rechargeable e-ASSIST driver, Higher-Speed), IB11P02U (11-piece impact driver bit set in pop-up case), 2200MBH120K01 (36-tooth ratchet screwdriver with 10-bit set). The 220USBS1U is Vessel's Higher-Speed e-ASSIST model: its motor spins fasteners down at up to 1,200 rpm and 3.5 lbf-in (0.4 N·m) of output — rated 4x faster than Vessel's standard 220USB — then hands off to manual mode for up to 88.5 lbf-in (10 N·m) of hand torque on the final tightening turn. It's rated for fasteners up to M6, runs on a built-in 3.6V, 800mAh Li-ion cell that recharges over any USB port via the included micro-USB cable, and has a built-in LED that lights the fastener as you drive. It ships with an Impact Ball Torsion Bit, Phillips #2 x 90mm, and is backed by Vessel's 6-month e-ASSIST series warranty. The 2200MBH120K01 is a manual ratcheting screwdriver built around a 36-tooth internal ratchet, so you can keep the bit engaged and drive with short wrist movements instead of full handle resets. Its ball-grip handle detaches to convert the tool into a compact stubby driver for tight clearances, and its SUS bit holder uses a rare-earth magnet to keep bits seated. It includes 10 bits (slotted, Phillips, square, and Torx) in a BITSBELT holder, all on a standard 1/4-inch hex interface. The IB11P02U rounds the kit out with 11 more impact-rated bits in a compact pop-up case — a slotted bit, three Phillips bits, a square bit, five Torx bits, and a 50mm bit holder, all rated at 62 HRC hardness and built with a torsion zone to absorb shock from impact driver use. Together this kit covers three ways of driving a fastener — fast electric-assist, manual ratchet for feel and tight spots, and impact-rated bits for use in a cordless impact driver — on a shared 1/4-inch hex bit standard. It's a fit for electronics techs, installers, maintenance crews, and any DIYer who wants the fastest small-fastener kit in Vessel's lineup without piecing one together themselves. What's in the Box (1) Vessel 220USBS1U e-ASSIST Higher-Speed Screwdriver (1) Impact Ball Torsion Bit, Phillips #2 x 90mm (for 220USBS1U) (1) USB charging cable, Micro USB Type B, 1m (for 220USBS1U) (1) Vessel 2200MBH120K01 BALL GRIP Interchangeable Ratchet Screwdriver (10) 1/4 in. hex shank bits for 2200MBH120K01: Slotted #4, Slotted #6, Phillips #1, Phillips #2, Phillips #3, Square #1, Square #2, Torx T15, Torx T20, Torx T25 (1) BITSBELT bit holder, 6.35mm (for 2200MBH120K01) (1) Vessel IB11P02U Impact Ball 11-Piece Impact Driver Bit Set: Slotted #6, Phillips #1, Phillips #2, Phillips #3, Square #2, Torx T10, Torx T15, Torx T20, Torx T25, Torx T30, plus a BH-2 bit holder (50mm) (1) Pop-up case (for IB11P02U bit set) No wall adapter is included for the 220USBS1U — it charges from any USB power source via the included cable. Key Specifications e-ASSIST No-Load Speed Up to 1,200 rpm e-ASSIST Electric Output 3.5 lbf-in (0.4 N·m) e-ASSIST Manual Torque (max) 88.5 lbf-in (10 N·m) e-ASSIST Battery 3.6V, 800mAh Li-ion, USB rechargeable e-ASSIST Max Fastener Size M6 Ratchet Gear (2200MBH120K01) 36-tooth Bit Set Hardness (IB11P02U) 62 HRC Bit Interface (all pieces) 1/4 in. hex shank Total Bits Included 21 (10 on ratchet driver + 11 in IB11P02U set) Made In Japan Compatibility Shared Bit Standard Every bit in this kit — on the ratchet driver, in the IB11P02U set, and the e-ASSIST driver's own bit — uses the standard 1/4 in. (6.35mm) hex shank interface, so bits are interchangeable across all three pieces. Impact Driver Use The IB11P02U bits are torsion-designed and marked for impact driver use; the e-ASSIST and ratchet drivers in this kit are manual/low-torque powered tools, not impact drivers. Built For Electronics Assembly Small Appliance Repair Cabinet & Furniture Hardware Enclosure & Panel Assembly General Repair Maintenance Bench Work Pro Tip Let the e-ASSIST driver's motor run the fastener down and finish the last turn by hand — its Higher-Speed drive spins faster than the Higher-Torque 220USB1U, so running it under power past the seating point is more likely to strip a small screw. Reach for the ratchet screwdriver (detach the handle for stubby mode) or the IB11P02U bits when the job calls for manual feel or a cordless impact driver instead. Warranty & Support Vessel covers e-ASSIST series products, including the 220USBS1U, under a 6-month warranty. Coverage requires proof of purchase through an authorized dealer and does not extend to product bought through unauthorized resellers. The 2200MBH120K01 ratchet screwdriver and IB11P02U bit set are manual hand-tool accessories with no separate warranty term stated by Vessel. Tool Nut's Take Tool Nut's Take The Fastest Small-Fastener Kit in the Lineup — Powered, Ratchet, and Impact Instead of picking one driving method, this bundle gives you all three in a shared bit standard, built around Vessel's quickest e-ASSIST driver. Who it's for: Electronics techs, installers, and DIYers running high volumes of small fasteners who want the fastest powered drive-down speed, plus a manual ratchet driver and an impact-ready bit set on hand for everything else. Why it stands out: All three pieces share a 1/4 in. hex bit interface, so the 21 included bits work across the ratchet driver, the e-ASSIST driver, and any compatible impact driver you already own. Worth knowing: The Higher-Speed e-ASSIST driver trades torque for RPM — its 0.4 N·m electric output is lower than the Higher-Torque 220USB1U's 2.0 N·m, so it's tuned for spinning small screws down fast, not for higher-torque driving; final tightening is manual either way, and it's capped at M6 fasteners. Common Questions Do all the bits in this kit fit each other's tools? Yes — the e-ASSIST driver, the ratchet screwdriver, and the IB11P02U set all use the standard 1/4 in. (6.35mm) hex shank interface. Can I use the IB11P02U bits in a cordless impact driver? Yes, they're torsion-designed and marked for impact driver use. The e-ASSIST and ratchet drivers included in this kit are not impact drivers themselves. Does the e-ASSIST driver need a separate charger? No — it charges over any standard USB port using the included micro-USB cable. What's the difference between this kit and the VesselBundle-Power kit? This kit includes the 220USBS1U Higher-Speed e-ASSIST driver (up to 1,200 rpm, lower electric torque); VesselBundle-Power uses the 220USB1U Higher Torque driver instead (2.0 N·m electric output, lower rpm). The ratchet screwdriver and bit set are the same in both.