Honeywell FS-SICC-0001/L9 System Interconnection Cable

Configured for multi-channel signal routing in Honeywell Safety Manager architectures, the Honeywell FS-SICC-0001/L9 (FS-SICC-0001 System Interconnection Cable) provides direct physical/electrical execution. Hardware Specifications Parameter Specification Model FS-SICC-0001/L9 Brand Honeywell Origin USA Weight Approx. 0.42 kg Dimensions Outer Diameter: 9.93 mm (0.39 in), Cable Length: 9 m Operating Temp -20 deg C to +85 deg C (-4 deg F to 185 deg F) Power Consumption Passive component (Voltage Rating: 300 V) Cable Type System Interconnection Cable Conductor Configuration 20 x AWG 22 (0.34 mm2), Copper Shielding Double shielded for EMI protection Impedance 120 ohms Termination Pre-terminated Honeywell-compatible connectors Standard Compliance RoHS compliant, UL listed 4-20 mA HART Loop Protocol and Channel-to-Channel Isolation The double-shielded construction of the FS-SICC-0001/L9 assembly preserves signal integrity across cabinet-to-cabinet interconnections. High channel-to-channel isolation is maintained along the 20-conductor bundle, suppressing crosstalk between adjacent telemetry pathways. This shielding architecture attenuates external electromagnetic interference (EMI), ensuring high-fidelity transmission of analog measurement signals and digital communication over 4-20 mA HART loop protocol connections. Frequently Asked Questions Q: What physical length does the L9 suffix denote for the FS-SICC-0001 series? A: The FS-SICC-0001/L9 cable specifies a overall assembly length of 9 meters. Q: Can this cable assembly be hot-swapped during online maintenance? A: Disconnecting the cable interrupts field signal pathways; redundant loop paths must be verified prior to removal to prevent unintended trip conditions. Q: How is EMI suppression achieved across the conductor core? A: The cable utilizes continuous double shielding combined with a 120 ohm nominal impedance profile along its full length. Field Installation Guidelines Observe minimum static and dynamic bend radius limits corresponding to the 9.93 mm outer diameter during cable tray routing. Fasten pre-terminated connector locking mechanisms securely to FTA interface headers to prevent pin contact oxidation or vibration loosening. Verify shield continuity and ensure proper grounding at designated cabinet earth buses to avoid noise coupling and ground loops. Avoid running system interconnect cables in close parallel proximity to high-voltage AC power distribution conduits.