xTool Desktop Air Purifier for F1, F2, M1 Ultra & M2

The xTool Desktop Air Purifier is a compact, sealed fume filter that sits next to an xTool F1, F2, M1 Ultra or M2 and cleans laser smoke without venting outdoors. Three filtration layers – including a double-layer H13 True HEPA filter – capture 99.97% of particles down to 0.3 μm, while activated carbon absorbs gases and odours, at 55 dB or less.Key Specifications Compatible machines xTool F1, F2, M1 Ultra, M2 (M2 needs the exhaust duct adapter for M2) Filtration Pre-filter (≥5 μm), double-layer H13 True HEPA, activated carbon Efficiency 99.97% of particles down to 0.3 μm Noise 55 dB or less Fan speeds 3 levels Dimensions 285 x 190 x 296 mm Weight 4.6 kg Input 24 V / 2.5 A Connection USB Type-C How It WorksConnect the purifier to the laser and, in linked mode, it starts when the job starts and pauses 10 seconds after it ends for an extra clean. Three fan speeds are available: xTool suggests the low or middle level for infrared jobs and the maximum level for diode laser work. A pre-filter catches visible particles of 5 μm and larger, protecting the HEPA layer; the carbon layer handles smell and harmful gases.MaintenancePress the button to lift the lid, take out the used filter pack, drop in a new one and close the lid. Two spare pre-filters are included; xTool recommends replacing the filter pack after three pre-filters have been used. Replacement packs are sold separately. For sensitive users, the included exhaust pipe lets you vent outdoors as well.Compatibility xTool F1 xTool F2 xTool M1 Ultra xTool M2 The M2 requires xTool’s Desktop Air Purifier exhaust duct adapter for M2, which is not included here. For the P2S, P3, F1 Ultra, S1 or M1, choose the xTool SafetyPro AP2.Who It’s For Home and apartment users without a window to vent through Classrooms and shared studios that need quiet operation What’s in the Box Desktop Air Purifier Filter pack Exhaust pipe and pipe adapter 2 spare pre-filters Power adapter and power cable USB Type-C cable User manual Available from Eolas PrintsEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU with EU warranty and support included. It is the recommended indoor partner for the xTool M2 colour craft laser and the F-Series.