LP 2017-2020 Hyundai Elantra - Lower / Ball Joint Extension Plates

LowLifeProjects Newly Designed Custom Lower Control Arm/Ball Joint Extension Plates! Vehicles: 2017-2020 Hyundai Elantra, gt sport , base Product: Lower Control Arm/Ball Joint (Bolt on) Extension Plates Product Details: Lower Control Arm/Ball Joint (Bolt On) Extension Plates made from Cold Rolled 3/8 Steel, CNC Custom Designed & Cut. Will provide from 25, 38 AND 50 mm Lower Extension. ( update there will no longer be a 3rd hole on this product , ) not able to run *NOTE: IF YOU ARE RUNNING THE 25MM (FIRST ADUSTMENT HOLE) YOU MUST PURCHASE FULL (12) SPACERS WITH YOUR RCA KIT! DROP DOWN BOX IS AVAILABLE TO ORDER FULL SET OF (12) SPACERS! Recommend having - 9 degrees of camber or higher. Only run first adjustment hole unless you have -15 degrees of camber or more. Camber degree is anywhere from -1 to -4, depending on any other Aftermarket Parts. ( Ex. Tilted Spindles, LLP Camber Plates etc. ) *NOTE: (VERY IMPORTANT): Outer Tie Rods MUST be Extended to Achieve correct alignment, IF VEHICLE HAS 0 DEGREES of Camber. IF Vehicle has -8 OR MORE, Tie rods most likely will NOT have to be Extended. Installation Details: Video is Available on our Instagram Page IGTV @LowLifeProjects. Top Camber Plates are Recommended (We Also Supply) & Factory Ball Joint Studs Must be Pressed Out for Installation. *IGTV Installation/Guide Video Link: https://www.instagram.com/tv/CQ_dvA_HZ7h/?utm_medium=copy_link Note: (Kits will include New Hardware Bolts, Nuts & Washers for Installation)