Framola™ Attached 1-Bay 15° Pitched Roof Lean-To Pergola Construction Bracket Kit

Framola™ Attached 1-Bay 15° Pitched Roof Lean-To Pergola Construction Bracket Kit Create a clean wall-mounted timber structure with the Framola™ 1-Bay 15° Pitched Roof Lean-To Pergola Construction Bracket Kit. Designed specifically for 4" x 4" timber, this kit brings together the main steel brackets needed to build a single-bay lean-to pergola, patio cover or similar garden structure with a fixed 15° roof pitch. The two main corner brackets form the front upper corners of the structure, connecting the upright posts, front horizontal beam and sloping rafters together at a fixed 15° angle. This takes the guesswork out of creating the roof pitch and helps keep the structure consistent from one side to the other. At the rear, the two angled rafter brackets allow the sloping timbers to connect directly to a suitable wall to create a pitched roof pergola. Four Internal-L brackets reinforce the main timber joints from inside, while two post base brackets secure the front uprights at ground level. Together, the components create a coordinated bracket system for a neat and practical lean-to build. The kit is designed for 4" x 4" timber only and is suitable for structures with timber lengths of up to approximately 3 metres. It works particularly well for lean-to pergolas, patio covers, sheltered seating areas and other wall-attached timber garden structures where a pitched roof design is preferred. All pitched roof pergola brackets are made from galvanised steel and finished in your choice of Textured Black or Anthracite Grey. You can also choose to add 2 boxes of 65mm timber installation screws to give you the main timber fixings required for assembly. What's in the Kit? 2 x Opposing 15° Corner Brackets 4 x Internal-L Brackets 2 x Post Base Brackets 2 x Angled Rafter Wall Brackets Optional: 2 Boxes of 65mm Timber Installation Screws Key Features: Fixed 15° Roof Pitch - Main corner brackets automatically set the pitched roof angle Designed for Lean-To Structures - Ideal for wall-mounted pergolas, patio covers and sheltered seating areas Complete 1-Bay Bracket Set - Includes the main brackets required for a two-post wall-attached structure 4" Timber Compatibility - Designed specifically for 4" x 4" pergola timber Wall-Mounted Rafter Support - Angled rear brackets connect the sloping rafters directly to a suitable wall Internal Joint Reinforcement - Four Internal-L brackets strengthen the main timber connections Post Base Brackets Included - Provides a fixing point for both front upright posts Galvanised Steel Construction - Strong steel bracket system designed for outdoor timber structures Two Powder-Coated Finishes - Choose Textured Black or Anthracite Grey Optional Screw Packs - Add 2 boxes of 65mm timber installation screws when ordering Made in the UK - Designed and manufactured in Britain Compatibility & Specifications: Pergola Style: 1-Bay Lean-To / Wall Attached Roof Pitch: 15° Timber Size: 4" x 4" / Approx. 100mm x 100mm Front Upright Posts Required: 2 Suggested Maximum Timber Length: Approx. 3m Finish Options: Textured Black or Anthracite Grey Bracket Quantity: 10 Brackets Total Optional Screws: 2 Boxes of 65mm Timber Installation Screws Please Note: Timber is not included with the pitched roof pergola kit. Wall and ground fixings are not included. This kit is designed for 4" x 4" timber only. We suggest using timber lengths up to approximately 3 metres. If the screw option is selected, 2 boxes of 65mm timber installation screws will be supplied with the kit.