7mm T-Slot Seal for Framed Shower Doors 9mm Height RY6306

Key Specifications Catalog no. RY6306 Seal type Flexible T-slot / track-insert shower door seal Best for Framed shower door vertical channels and selected bottom tracks Overall profile height Approx. 9mm Retaining base width Approx. 7mm Neck width Approx. 1mm Length 2000mm – can be trimmed to size Material Clear flexible PVC Installation Slides into an existing retaining channel or track Pack quantity 1 strip ✓ Free UK Mainland Delivery | ✓ Price Includes VAT | ✓ 10-Month Warranty Check Before You Buy This seal is suitable if: Your framed shower door uses an existing retaining channel or T-slot. The internal track has enough space to accept the approximately 7mm retaining base. You need a flexible seal along the vertical edge of a framed door. Your bottom track uses the same type of insert profile. You want a flexible fin that can be trimmed slightly to suit the actual contact point. You need up to 2000mm of seal. Choose another seal if: Your old seal clips directly onto exposed glass. The channel is too narrow for the approximately 7mm retaining base. You need a magnetic closing seal. You need a much taller or differently shaped profile. Your installation does not use a retaining groove or track. Flexible Track Seal for Framed Shower Doors RY6306 is a 2000mm clear PVC track-insert seal for framed shower doors. Its approximately 7mm retaining base slides into a compatible channel, while the 9mm overall profile height provides a slightly different reach from other seals in the same range. It is most commonly used along the vertical edge of framed shower doors, although some bottom tracks may use the same type of insert profile. The flexible sealing section can be trimmed slightly where needed, and the full 2000mm strip can be cut down before fitting.