HUP Carbon Cockpit Drop Handlebars (36cm to 40cm)

Lightweight carbon integrated cockpit drop handlebars, suitable for the HUP GCX gravel bike, from #HUPcc! A compact design for a comfortable and efficient bike fit. Sizes available are 36cm, 38cm and 40cm, with the compact 75mm reach required to avoid over-stretching. A drop of 125mm means you can still get aero on the drops too (especially on slightly higher gravel bike stacks) plus a flat-topped, aero and ergonomic top tube brings more comfort on those long days in the saddle. Full internal cable routing, designed for Token A-box headsets and spacers, for that seamless internal cable routing and a clean, aerodynamic profile on your bike. HUP CCB-001: Toray 700 carbon cockpit drop handlebars (standard 2-bolt Garmin mount on underside) includes aero top-cap and bolt Centre-To-Centre Width (at bottom): 36cm, 38cm & 40cm Stem Lengths: 80mm, 90mm, 100mm, 110mm & 120mm Fork steerer: 1 1/8" (28.6mm) Flare: 8 degrees Reach: 75mm Drop: 125mm Outside witdth at Top of Hoods*: 36cm = 340mm, 38cm = 360mm, 40cm = 380mm Outsdie Width at Shifters*: 36cm = 360mm, 38cm = 380mm, 40cm = 400mm CTC width at Bottom of Drops*: 36cm = 360mm, 38cm = 380mm, 40cm = 400mm Headtube angle: designed for 70 to 73 degrees Headset system: compatible with Token A-box system Weight: 310g (36cm) to 340g (40cm) Colour: Black Model suitability: HUP GCX (not HUP evo) Road, Gravel or Cyclocross Bikes to ASTM category 2 *Measurement includes standard 2.5mm bar tape. Recommended stem bolt torque = 5Nm (never exceed 7Nm). Bolts require an Allen key both ends. The rear edge of the steerer hole on the cockpit, represents the same height position as the underside of the top cap, so finished steerer should be 1-2mm below the rear edge of the steerer hole on the cockpit. We recommend initially adding an additional steerer spacer above your stack requirement, to avoid cutting your fork too short. More installation details HERE