Trak Racer TR80S Adjustable Pedal Heel Plate

Trak Racer TR80S Adjustable Pedal Heel Plate The TR80S is built on 80 series profile, and this heel plate is cut for that frame rather than adapted to it. It is the TR80S version of the part, sold separately from the TR40S one because the two cockpits do not share a mounting pattern. The plate gives the heel a solid surface at a set height, and the adjustment means that height is yours rather than a number the frame designer picked. Race-grade construction, bolted to the cockpit rather than resting on the floor. It suits GT, formula, rally and training layouts, and pairs with the pedal mounting hardware already on the TR80S in the aluminium chassis range. Key features Made specifically for the TR80S cockpit Adjustable height and position Race-grade construction Cut for 80 series profile Solid heel reference under braking Suits GT, formula and rally positions Reduces fatigue over long sessions Mounting hardware included Why the plate is cockpit specific Trak Racer make one of these for the TR40S and one for the TR80S, and they are not interchangeable. The frames use different profile and different mounting positions, so a plate that bolts cleanly to one has nowhere to sit on the other. That is the reason to check the model before ordering rather than after. If you are running a TR80S this is the correct part, and the TR40S version is listed separately. Both sit with the rest of the hardware mounts range. Set it with the seat where it will live Heel plate height interacts with everything around it. Move the seat back and the heel lands further forward on the plate. Change pedal angle and the whole geometry shifts again, which is why this one adjusts rather than bolting on at a fixed height. The practical approach is to finish the seat and pedal positions first, then sit in the rig and set the plate to where your heel naturally falls. It takes two minutes and it is the difference between a reference point and an obstacle. Browse the sim racing pedals that mount above it. Frequently asked questions Will it fit a TR40S?No. The TR40S has its own version of this plate. The two cockpits use different profile and mounting positions, so the plates are not interchangeable.What is adjustable about it?Height and position. You set it to your leg length and seat position rather than accepting a fixed height.When should I set the height?After the seat and pedals are where they will stay. Moving either one changes where your heel falls, so the plate is the last thing to adjust.Are the pedals included?No, the heel plate is on its own. Pedals are chosen separately and there is a wide range in the racing simulator accessories section. Specifications Part number: TR80S-PEDALPLATE Type: Adjustable pedal heel plate Construction: Race-grade materials Adjustment: Height and position Compatible cockpit: Trak Racer TR80S racing cockpit Interchangeable with TR40S version: No Suits: GT racing, formula style, rally simulation and driver training setups Mounting: Bolts to the cockpit frame Mounting hardware: Included Pedals: Sold separately Warranty: 5 years, materials and manufacturing What's In The Box? 1x Trak Racer TR80S adjustable pedal heel plate Mounting hardware Reviews Warranty All Trak Racer products are backed by a 5-year limited manufacturer warranty covering materials and manufacturing under standard residential use, supported by Gamer Gear Direct's dedicated Australian team. This warranty covers manufacturing defects and ensures every product is 100% genuine, sourced directly from Trak Racer's official distributors. If you need assistance, our local simulation experts are only a call or email away.