Soft99 F7 Fusso Coat Liquid Type Sealant (300ml)

Soft99 Fusso Coat F7 Liquid Sealant (300ml) | Automize Fusso Coat. Liquid Form. Seven Months of Protection. Soft99 Fusso Coat F7 is the liquid version of the legendary Fusso Coat paste wax — the same PTFE fluorine polymer base, the same sharp wet-looking gloss and up to 7 months of hydrophobic protection, in a format that spreads and wipes off significantly faster. The original Fusso Coat paste built its reputation on durability and genuine beading performance. F7 takes that same fluorine polymer chemistry and puts it in a thin, runny liquid carrier — making it the fastest way to lay down Fusso-level protection. Soft99's TSI (Top Shield Impermeable) technology creates an impermeable barrier on the paint surface, while WARP (Wipe Assistance Radical Power) technology ensures the coating goes on evenly without bumps or high spots. Apply with the included sponge, leave 10–15 minutes, buff off — done. Applicator sponge included in the box. PTFE Fluorine Polymer Base Fusso Coat F7 is built on the same Fusso fluorine polymer (PTFE) technology as Soft99's legendary paste wax — known for its durability, genuine hydrophobicity, and sharp wet-looking gloss that synthetic waxes rarely match. Up to 7 Months Durability Soft99's TSI technology creates a long-lasting impermeable barrier on the paint surface. Up to 7 months of protection on a daily driver with proper maintenance — significantly longer than most spray sealants. Easier Than the Paste The thin liquid carrier makes F7 faster to spread and easier to buff off than the paste version — trading a small amount of durability (around 5–7 months vs 12 months for the paste) for a considerably quicker application. Ideal Basecoat Works brilliantly as a durable foundation layer under more hydrophobic or glossier topcoats — the long-lasting PTFE base provides the protection while a complementary topcoat adds extra beading or depth on top. 🛠️ How to Use 1 Prep the Paint Wash thoroughly with a pH-neutral shampoo and dry completely. Decontaminate with a clay bar and perform an IPA or panel wipe to remove any oils or residues. Surface must be completely clean and dry before application. 2 Apply Sparingly Put a small amount of F7 onto the yellow side of the included sponge — less than you think you need. F7 is very thin and runny; over-application makes buffing significantly harder. Spread evenly across one panel at a time using cross movements. 3 Cure & Buff Allow 10–15 minutes for the product to cure on the surface, then buff off with a clean, soft microfiber towel. Work panel by panel — do not apply to the whole car before buffing. Quick Reference Product Type PTFE fluorine polymer liquid sealant Key Technology TSI (Top Shield Impermeable) + WARP (Wipe Assistance Radical Power) Durability (per Soft99) Up to 7 months with regular maintenance Finish Sharp, wet-looking gloss Paint Colours All colours — light and dark Cure Time 10–15 minutes before buffing Included 300ml bottle + applicator sponge F7 is an extremely thin, runny formula — always apply sparingly. Over-application will make buffing difficult and can leave uneven residue. Avoid contact with unpainted plastic trim — staining can occur. If contact is made, wipe off immediately before it cures. Always test on a small inconspicuous area first. Refer to Soft99's current product label for the most up-to-date guidance. Fusso-level protection. Liquid-easy application. Order now for quick delivery all over Pakistan.