Wyatt Audio Heiress Fuzz

Built out of love of the sound and simplicity of a classic Two Transistor FF, HEIRESS expands on this topology and brings in more controls to dial in each separate stage of the circuit. The result? A massively versatile FUZZ that allows you to adapt your tone for every set up. Powered by 2x BC183 silicon transistors, a switchable MP10B germanium transistor and variable component values: HEIRESS is a versatile device able to go from glassy cleans, to ripping velcro, to that classic sound that paved a way for new genres. Your tone is in there somewhere! - Handmade in Brighton, England; With a fully analog signal path engaged through a true-bypass circuit - HEIRESS Features 7 Controls to help you dial in your destruction to the closest frequency: FREQ : A wide set tone control: Sweeping from warm and wooly when fully counter clockwise, to rip and tear when fully clockwise NOISE : Sets the amount of gain being pushed from the circuit. From a touch of drive when fully counter-clockwise, to absolute destruction when fully engaged. SIL/GER SWITCH : Swaps between Silicon and Germanium Transistors: Switch “DOWN” for a more “Modern” sounding fuzz, or “UP” for more “Vintage” inspired. SILICON : BC183 GERMANIUM : MP10B LEVEL : Sets the overall output volume BASS CUT : Removes low end rumble for a more “Cut Through” tone - : Bass Cut + : Regular Bass Frequency LOAD : Controls the amount of power being pushed into the input stage: Resulting in more gain and a more “Open” sound. *This control can react differently depending on the input signal, and will shut off if pushed past its limit* VOLTS : Sets the amount of current that gets fed into the circuit; ranging from full power to gradually draining to simulate a dying battery, giving spitty and broken tones. *This control can react differently depending on the input signal, and will shut off if pushed past its limit* Current draw : 100mA Enclosure Dimensions : Length : 120mm Width : 94mm Height : 42mm