Flipsky IP68 Waterproof NON-VESC FT85CS 85V 150A With Aluminum Enclosure For Electric Scooter / Ebike Speed Controller / Electric Motorcycle / Robotics / Efoil / Drones

Specifications : Firmware: V1.6 and above (firmware update via Flipsky ESC Tool supported) Voltage: 14V-85V (safe for 4-20S) Continuous Current:85V/150A (Values depend on the mounting, ambient temperature and air/water circulation around the device.) Peak Current: 250A BEC: 5V@1A Power Wire: 8 AWG (1200mm) Motor Wire: 8 AWG (195mm) Programmable Tool: Flipsky ESC TOOL PWM Frequency Control: YES Multiple Speed Gear Limit Control: YES (UART） Regenerative Capacity: YES Communication Ports: USB，CAN，UART，PPM，ADC Control Signals Support: PPM，ADC，UART (compatible with all FLIPSKY VX Series remotes) Size: L93.8mm*W63mm*H26mm (with aluminum enclosure) Features: Fully sealed with lP68 water-proof rate. Adopting ARM Cortex-M4 structure with the max 240MHZ,improves PWM switching frequency and the motor RPM. Programmable via Flipsky ESC Tool to be compatible with multi-types of motors, different battery voltages and multiple control methods. Programmable via Flipsky remote controller VX4Pro(remote firmware version: VX4Pro_V1.2 and above). Supporting motor FOC with low working noise and smooth starting. Supporting save / load configuration files via ESC Tool. Supporting adaptive variable PWM frequency control. Supporting real-time data and fault alerts. Supporting multiple speed levels: Level 1 (Low), Level 2 (Medium), Level 3 (High). Supporting Sensorless Mode: IPDS, HFPI, OPEN. Startup Modes Support: IPDS (sensorless), HFPI (sensorless), OPEN (Sensorless Open-Loop Startup). Traction Control: YES. Supporting control types: Current, Duty Cycle, Speed Control. Supporting emergency stop and shutdown. Support safe power-on protection (in PPM&ADC control modes only). Protection functions: low and high voltage protection, MOSFET over-temperature and over current protection, battery overcharge and discharge protection Wiring diagram: