Bilt Hamber | Touch-On Ceramic Paint Protection

Bilt Hamber Touch-On is a highly concentrated ceramic paint protection treatment that adds strong water repellency and dirt-release properties during the final stage of a vehicle wash. It can be applied through a pressure washer, pump sprayer, trigger sprayer, or wash bucket to clean and protect the surface in one efficient step. Key Features & Benefits 🔹 Wash-and-Protect Performance – Its low-foaming detergent action allows Touch-On to provide additional cleaning while depositing hydrophobic protection during a second-stage bucket wash. 🔹 Durable Ceramic Water Behavior – Leaves the paint with pronounced water beading and sheeting, making the vehicle easier and faster to dry after washing. 🔹 Dirt-Releasing Surface – The treated surface releases contamination more easily during future washes, helping Bilt Hamber Touch-Less deliver stronger contactless cleaning results. 🔹 Multiple Application Methods – Apply it with a foam cannon or pressure-washer reservoir, pump sprayer, trigger sprayer, or traditional bucket and wash mitt. How to Use Pressure Washer or Foam Cannon Method Step 1: Wash the vehicle thoroughly and remove loose dirt before applying Touch-On. For the complete Bilt Hamber system, begin with Touch-Less and complete any necessary contact wash. Step 2: Add 30 ml of Touch-On to the pressure-washer detergent reservoir or foam-cannon bottle, then add clean, cool water until the total mixture reaches 300 ml. Step 3: Shake well and apply the solution evenly across the entire wet vehicle. Step 4: Immediately rinse the vehicle thoroughly with the pressure washer. Step 5: Dry the vehicle with a clean microfiber drying towel or filtered-air blower. Do not allow the vehicle to air-dry. Bucket-Wash Method Step 1: Add 30–60 ml of Touch-On to approximately 10 liters of warm water. Step 2: Mix thoroughly and wash the vehicle with a clean, high-quality wash mitt. Step 3: Rinse completely with clean water. Step 4: Dry the vehicle immediately with a microfiber drying towel or air blower. Pro Tip Apply Touch-On to a freshly cleaned, cool vehicle out of direct sunlight. Work quickly and rinse immediately after application—using more product or allowing the solution to dry will not improve protection and can increase the chance of spotting. Dilution Ratios Pressure Washer or Foam Cannon – 30 ml product topped up to 300 ml total solution Bucket Wash – 30–60 ml per 10 liters of water Single-Vehicle Treatment – One 30 ml dose per application Why We Love It “At Car Supplies Warehouse, we love Bilt Hamber Touch-On because it delivers meaningful hydrophobic protection without adding a separate wipe-on sealant step to the wash process. Just 30 ml can treat an entire vehicle, and the ability to apply it through a foam cannon, sprayer, or wash bucket makes it easy to fit into nearly any detailing workflow. Paired with Touch-Less, it also creates a smarter maintenance system by helping dirt release more easily during future pre-washes.” Compatible With / Works Best With ✅ Bilt Hamber Touch-Less – Removes road film and loose contamination before Touch-On is applied, while Touch-On’s dirt-release properties help Touch-Less perform even better during future maintenance washes. ✅ MTM Hydro PF22.2 Foam Cannon – Provides controlled, even application when using the pressure-washer method. ✅ AUTOFIBER Dreadnought MAX Car Drying Towel – Quickly removes remaining water after rinsing to help prevent water spots and complete the wash safely. Frequently Asked Questions ❓ Is Touch-On a shampoo or a paint sealant? 💡 It performs both roles. Touch-On contains low-foaming detergency for second-stage washing while simultaneously depositing durable hydrophobic ceramic protection. ❓ Can Touch-On be applied with a foam cannon? 💡 Yes. Add 30 ml to the cannon or pressure-washer reservoir, top the mixture up to 300 ml with cool water, apply evenly, and rinse immediately. ❓ Does the vehicle need to be clean before application? 💡 Yes. Touch-On is intended for the final washing or protection stage, not as a heavy pre-cleaner. Remove loose dirt and road film first, preferably with Bilt Hamber Touch-Less. ❓ Can I allow Touch-On to dry on the vehicle? 💡 No. Rinse it immediately after application and dry the vehicle with a microfiber towel or air blower. Allowing the vehicle to air-dry may cause water spotting. ❓ Can it be used on an existing ceramic coating? 💡 Yes. It can be used as a hydrophobic maintenance treatment on protected paint, although results may vary depending on the condition and surface behavior of the existing coating. Technical Specifications 📏 Available Sizes: 30 ml treatment packs and 1 liter 🧴 Formula Type: Concentrated, low-foaming hydrophobic ceramic wash and paint-protection treatment 💨 Scent: Not specified by the manufacturer 🚗 Application Type: Pressure washer, foam cannon, pump sprayer, trigger sprayer, or bucket wash 💧 Finish: Hydrophobic, dirt-releasing paint protection 🧽 Recommended Use: Final wash or rinse-stage protection after pre-cleaning