ARRI MB-14 MATTEBOX (4/2 STG+138) 15/19

ARRI MB-14 MATTEBOX (4/2 STG+138) LTR - OPTION - AVAIL INCLUDES ARRI MB-14 Mattebox ARRI MB-14 4-Stage ARRI MB-14 2-Stage ARRI Reduction Trays (2) ARRI 6.6x6.6 Filter Tray (3) ARRI 6.6x6.6 Geared Tray ARRI Swing-away Arm ARRI Rod Support 15mm ARRI Rod Support 19mm ARRI Hard Mattes 35 (6) ARRI MB-14 Eyebrow ARRI MB-14 Ears L+R (2) ARRI 80, 95, 110, 114, Rings (4) ARRI Bellows 138 Ring (1) ARRI Top Mounting Grid ARRI Filter Gear Whip ATA Case for ARRI Professional Use Uniquely included also are the 4x5.65 / 6x6.6 Reduction Trays and MB-14 2-Stage. The MB-14 is built for heavy camera builds (like ARRI ALEXA or Sony VENICE) that require deep-stage filtration and maximum flare control. It is heavily utilized with large zooms (e.g., Angenieux Optimo or ARRI Master Primes) and is favored for its mechanical filter control, which prevents focus pullers from having to walk in front of the lens to adjust grad filters during takes. Core Specifications Max Filter Size: 6.6" \(\times \) 6.6" square filters Rear Bellows Filter: Accepts a single 138mm round filter Coverage: Minimum focal length of ≈12 mm (or ≈9.8 mm with the wide-angle "MB-14-W" carrier) Material: Anodized aluminum Dimensions: 372 \(\times \) 260 \(\times \) 155 mm Weight: Approx. 2,450 g (5.4 lbs) Modular Components & Functions 4-Stage, 3-Stage, 2-Stage: The MB-14 is highly modular. You can swap the back modules depending on your weight limits or filter requirements. The 4-Stage allows up to four \(6.6" \times 6.6"\) filters. 6.6x6.6 Filter Trays: Push-through trays that lock into place. 6.6x6.6 Geared Tray: Allows the filter to be connected to a drive shaft or whip. Swing-away Arm: Swings open 90 degrees to the front without needing to remove the matte box from the rods. Rod Supports: Easily swaps between 15mm and 19mm studio bridge plate consoles. Eyebrow (Top) & Ears L+R: Flags used to cut out top and side glare. Lens Rings & Bellows Ring: Adapts the back opening of the matte box (often 165mm or 138mm diameter) to fit various cinema lens front diameters (80, 95, 110, and 114mm). Top Mounting Grid: Used for mounting top flags, additional accessories, or a rain tray. Filter Gear Whip: Attaches to the geared tray to remotely rotate or slide graduated filters without touching the camera. Note: Because of its size and the necessity of \(6.6" \times 6.6"\) filters, the MB-14 is considered a studio piece. For lightweight, handheld, or clip-on applications, operators traditionally look to the modern ARRI LMB 4x5. ADD+ON'S ARRI 35 IIC, IIB, MOVIECAM ECLAIR NPR, BOLEX SBM ARRI FF-5 "Style" Studio Follow Focus ARRI FF-3 Studio Follow Focus OCONNOR CFF-1 Studio Follow Focus OCONNOR 1030, 2575, 515, 100, 50 HI HAT, LOW HAT FILTERS, MONITORS, WIRELESS GIMBALS MOVI M10, M15 EASYRIG SERENE VARIO 5