LAY IT ON RIGHT. The Pro Coat is a ceramic coating applicator built to put your product where it belongs — on the paint, not soaked into the foam. A plush, durable microfiber face lays coating down evenly. That means less waste, more coverage, and a cleaner install every time — reach for it any time you're laying down one of our Beadlock ceramic coatings. Soft, durable microfiber face: Lays down coatings & sealants evenly with a smooth, streak-minimizing wipe. Built for Beadlock: The right applicator for installing all of our Beadlock ceramic coatings, plus sealants and coating toppers. Comfortable block shape: Sized to sit in your hand with control for straight, overlapping passes on panels, trim, glass, and wheels. Usage note: Dedicate a fresh pad to each coating job; once a ceramic cures in the microfiber, that pad is done. How to Use Applying a Ceramic Coating Wrap the microfiber face over the foam block and get a comfortable grip. Apply several drops of your Beadlock ceramic coating in a line across the microfiber face. Wipe the panel in a cross-hatch pattern — up-and-down, then side-to-side — to lay down an even layer. Let the coating flash per the product's directions. Level and buff off the residue with a clean, plush microfiber towel before it fully cures. Detailer Tips Re-load with a few fresh drops every panel or two — you'll feel the applicator start to drag when it's dry. Store it flat and sealed between drops during a job; keep it out of dust and off the ground. Pairs with all of our Beadlock ceramic coatings and a quality plush leveling towel for a clean, high-gloss finish.