CW23 - Handheld Turbo Fan / Vacuum (252km/h)

Blow the dust out, then vacuum it up A pocket-sized 160W turbo tool that clears dust and debris from cameras, keyboards, cars and workbenches at up to 70 metres per second, then pulls it in with 6000Pa of suction. Up to 70 m/s (157 mph) airflow from a 160W, 118,000 RPM brushless motor 6000Pa suction with the included NIA010 cleaning kit Round and flat nozzles for focused or wide-area cleaning Four wind levels plus an instant Turbo, up to 120 minutes on Level 1 USB-C fast charging at 18W, full in about 1 hour 40 minutes Aero-grade aluminium body, 254g and pocket-sized Airflow strong enough to shift real dirt A 160W brushless motor spins up to 118,000 RPM and drives air at up to 70 metres per second, so it blows dust out of keyboards, camera bodies, PC fans and car vents that a squeeze bulb only stirs. That is powered cleaning with no cold propellant and no cans to refill. Suction that picks the mess back up Fit the vacuum attachments and the CW23 pulls in debris with 6000Pa of suction, so you can lift crumbs from a keyboard, grit from a car seat or dust from a desk. One tool blows the dirt loose and vacuums it away, rather than just pushing it somewhere else. A full cleaning kit in the box The included NIA010 kit adds brush nozzles, extension tubes and a dust bin, so you can reach into vents, seams and crevices around the home, car and workshop. Swap between blowing and vacuum attachments to match the job in hand. Two nozzles for two kinds of job The round nozzle focuses the airflow into a tight jet for deep cleaning between keys and inside ports. The flat nozzle spreads a wide sheet of air for larger surfaces, so you cover a desk or a car mat quickly. Full power the moment you need it A dual-stage button gives you a half-press to start blowing and a full-press for instant Turbo, so the strongest airflow is one squeeze away. Reach for it to break loose stubborn dust, then ease off for finer work. Three modes, set with two buttons Switch between a Continuous Blowing mode for steady airflow, a Quick Blowing mode for short bursts, and Instant Turbo for maximum power. A separate fan button and power button keep the controls simple in the hand. Up to two hours, quick to recharge The 18.5Wh battery runs up to 120 minutes on Level 1, with higher levels and Turbo trading runtime for power. It recharges over USB-C at 18W in about 1 hour 40 minutes, so a power bank or laptop tops it up between jobs. Metal build that keeps its cool The CW23 is machined from aero-grade aluminium alloy with a hard-anodised finish and ABS anti-slip textures, so a 254g tool takes daily handling. A siphon-type circulating cooling system carries heat away, so it holds performance through longer cleaning sessions. Wind for the camera, when you want it The same airflow that clears dust also creates natural movement in hair, fabric and water for photo and video work. Dial in a wind level to add life to a portrait or a product shot, then switch back to cleaning duty. WHY THE CW23 OVER A CAN OR A BULB BLOWER Blows and vacuums One tool clears the dust loose and picks it up, where canned air only blows it somewhere else. Strong air, no refills 70 m/s of electric airflow with no cold propellant and no cans to keep buying, so it is ready every time. A kit for tight spots 6000Pa suction plus brush and tube attachments reach into vents, seams and keyboards a rubber bulb cannot. Metal build, pocket size Aero-grade aluminium in 254g holds up to daily use, tougher than a hollow plastic handheld. WHO IT'S BUILT FOR Cameras & Electronics Blow and vacuum dust off lenses, keyboards, laptops, consoles and PC interiors. Home & Car Clear vents, blinds, crevices and upholstery, and dry small surfaces fast. Outdoor & Workshop Blow sawdust and debris off a bench, or dry gear after a wash. Photography & Video Add natural hair, fabric and water movement to a shot when you need it. WIND SPEEDS AND RUNTIME LEVEL WIND SPEED RUNTIME Level 1 18 m/s 120 min Level 2 26 m/s 60 min Level 3 33 m/s 40 min Level 4 45 m/s 18 min Turbo 70 m/s (max) burst SPECIFICATIONS Maximum wind speed 70 m/s (157 mph) Thrust 170g (6 oz) Suction power 6000 Pa Motor 160W brushless, up to 118,000 RPM Battery 18.5Wh Li-ion Charging USB-C 18W (5V/3A or 9V/2A), approx. 1h 40min Dimensions 127 x 67 x 38mm (5.00 x 2.64 x 1.50") Weight 254g (8.96 oz) Material Aero-grade aluminium alloy, HA III hard-anodised; ABS anti-slip Colours Alloy Orange, Classic Black FREQUENTLY ASKED QUESTIONS Is it safe on delicate gear like a camera sensor? Yes, with the right setting. Use a lower wind level and the focused round nozzle for controlled airflow around sensors and lenses, and step up to Turbo for keyboards, PC interiors, cars and larger areas. Does it blow and vacuum, and how do I switch? Both. It blows from the front, and with the NIA010 vacuum attachments fitted it pulls debris into a dust bin. The round and flat nozzles direct the airflow for either job. Do the cleaning kit and both nozzles come included? Yes. The CW23 ships with the NIA010 cleaning kit and both the round and flat nozzles, so the blow and vacuum attachments for cameras, keyboards, cars and outdoor cleaning are in the box. What's In The Box 1x CW23 Multipurpose Pocket Fan - 160W turbo blower and vacuum 1x Round Nozzle and 1x Flat Nozzle - focused and wide airflow 1x NIA010 Cleaning Kit - blowing and vacuum attachments One pocket tool to blow, vacuum and clean anywhere. GET YOUR CW23 NOW