Fujikura 100R Mass Fusion Splicer Kit

The Fujikura 100R is a high-performance ribbon fusion splicer designed for data centres, hyperscale infrastructure, metro networks, campus backbones and other high-fibre-count installations. It can splice single fibres or ribbon fibre, supporting up to 16 fibres when fitted with the appropriate optional V-groove and fibre holders. Fujikura’s Intelligent Alignment Control automatically corrects common fibre preparation and positioning issues before fusion. Auto Placement Correction checks that fibres are seated correctly in the V-groove, Gap Alignment Correction reduces variation between fibre end faces, and Axis Offset Correction improves alignment across the complete ribbon. This helps produce more consistent mass-fusion splices while reducing manual adjustment and operator intervention. The 100R uses self-cladding alignment with surface melting tension and provides typical splice losses from 0.02 dB for multimode fibre and 0.05 dB for G.652 singlemode fibre. Automatic operation covers fibre analysis, splice-mode selection, wind protector movement, clamping, fusion and heater operation. This standard kit includes the Fujikura CT60 fibre cleaver and RS03 thermal ribbon stripper, providing the core equipment required for professional ribbon fibre preparation and splicing. Key Features Splices single fibre and ribbon fibre Supports up to 16-fibre ribbon with suitable optional accessories 12-fibre V-groove and fibre holders included Intelligent Alignment Control Automatic fibre placement, end-face gap and axis correction Average singlemode splice time of 16 to 21 seconds Automated wind protector, clamps, splice cycle and tube heater Approximately 165 splice and heat cycles per battery charge Field-replaceable V-grooves and tool-free electrode replacement 4.95-inch touchscreen with up to 90x magnification Stores 20,000 splice results and 100 splice images GPS splice-location recording and geofencing Wireless CT60 cleaver tracking and blade management Typical Applications Data centre and hyperscale fibre installation High-fibre-count campus and metro networks Long-haul network installation and repair Ribbon fibre and 200 µm loose-fibre cabling Trunk cable repair using splice-on MPO connectors Standard Kit Contents Supplied with the Fujikura 100R fusion splicer, CT60 cleaver, RS03 thermal stripper, rechargeable batteries and power supplies, 12-fibre holders, spare 12-fibre V-grooves, spare electrodes, transit case, splicer strap, alcohol dispenser, USB cable, tripod mounting screws and operating documentation. Specifications Fibre Alignment Method Self-Cladding alignment with Surface Melting Tension Fibre Count Can Be Spliced Single and up to 16 Fibre Ribbon with applicable V-groove Applicable Fibre - Fibre Type Single-mode Fibre Multimode Fibre Applicable Fibre - Cladding Diameter Approx. 125 μm Applicable Coating - Fibre Holder Coating Shape: Refer to Options Cleave stalls: Approx. 10 mm Fibre Splice Performance - Splice Loss ITU-T G.652: Avg 0.05 dB ITU-T G.651: Avg 0.02 dB ITU-T G.653: Avg 0.08 dB ITU-T G.655: Avg 0.08 dB ITU-T G.657: Avg 0.08 dB Fibre Splice Performance - Splice Time SM Fast Mode: Avg 16 to 18 Seconds SM Auto Mode: Avg 19 to 21 Seconds Applicable Protection Sleeve - Sleeve Type Heat Shrinkable Sleeve Applicable Protection Sleeve - Sleeve Length Max. 66 mm Applicable Protection Sleeve - Sleeve Diameter Max. 6.0 mm before Shrink Sleeve Heat Performance - Heat Time 40 mm FP-05 Mode: Avg 33 to 40 Seconds 40 mm FP-04T Fast Mode: Avg 19 to 26 Seconds Single 60 mm Mode: Avg. 8 to 15 Seconds Fibre Tensile Test Force Approx. 2.0 N ElectrodenubululoJennbel meltoria Count Approx. 1,500 Splices Physical Description - Dimensions W 157 mm Physical Description - Dimensions D 178 mm Physical Description - Dimensions H 171 mm Physical Description - Weight 2.6 kg including Battery Environmental Condition - Temperature Operating: -10 to +50°C Storage: -40 to +80°C Environmental Condition - Humidity Operating: 0 to 95% RH non-condensing Storage: 0 to 95% RH non-condensing Environmental Condition - Altitude Max. 3,700 m AC Adapter - Input AC100 to 240V, 50/60Hz, Max. 1.5A AC Adapter - Output Approx. DC 12V, Max. 7A Battery Pack - Type Rechargeable Lithium-Ion Battery Pack - Output Approximately DC 12 V, Max 5A Battery Pack - Capacity Approximately 165 Splices with Heat Shrink Battery Pack - Temperature Operating: -10 to +50°C Recharge: 0 to +40°C Storage < One (1) Year: -20 to +20°C Storage < Three (3) Months: -20 to +40°C Storage < One (1) Month: -20 to +50°C Battery Pack - Recharge Time ≤ Six (6) Hours from Empty Battery Pack - Battery Life Approximately 500 Recharge Cycles Display - LCD Monitor TFT 4.95 inch Touch Screen Display - Magnification Approx. 30x: 12-Fiber Ribbon Approx. 90x: Single Fibre Illumination - V-Grooves LED Lamp Data Storage - Splice Mode 100 splice modes Data Storage - Heat Mode 30 heat modes Data Storage - Splice Result 20,000 splices Data Storage - Splice Image 100 images Other Features - Automatic Functions Splice-mode Select by Fibre Count Analysis Fusion Power Calibration Fully Automatic Cleaver Blade Management Wind Protector: Open and Close Clamp: Auto Clamping Force Adjustment Z-Holder Base: Auto Placement Correction Z-Holder Base: Gap Alignment Correction Splice Start Heater Lid: Open and Close Heater Clamp: Open and Close Heater Start Other Features - Reference Guide Video and PDF Store on Splicer Other Features - Electrode Replaceable without Tool Other Features - Software for PC Splicer Update via Internet Parameter Upload and Download Operating Splicer with PC Splice Image Download to PC Other Features - GPS Splice Location Recorded to Memory GEO Fencing Other Features - Screw Hole for Tripod 1/4-20 UNC