CWF Arcadian Flashlight - Sakura (Purple / Bronze Ano) Quantum Dragon

Don’t miss this opportunity to own a premium, feature-packed CWF Arcadian flashlight with everything you need for a customized lighting experience! Finish: Titanium with our laser engraved Sakura artwork given a purple bronze anodized treatment. Includes a complementing titanium clip Made in the USA Features: Quantum Dragon Engine 4500k emitter Adjustable power levels Triple-tap strobe function Thermal regulation Voltage protection Specs: Powered by an 18350 battery, 0.99 inches in diameter x 3.5 inches in length Customizable function sets Enter Configuration mode: Quickly momentary cycle (half tap) the switch 10+ times until it starts to rapidly flash. The light will then turn solid and start to ramp down. To select and option mode, keep holding the half press, allowing the ramp down to complete. Once the ramp down completes, the light will flash 3 times (one of each color) then enter the selected option mode. If no option mode is selected, the light will enter option mode 1. To cycle to the next option mode (options 2 - 4), during the ramp down release and again quickly half tap the switch. Option 1 = Mode group After entering option 1 mode, the light will flash the group number in a white light followed by a 3 flashes (one of each color). To select the desired mode group, release the switch during the 3 color sequence following the group number. Mode Groups: * Group 1: Color, ML, 5%, 15%, 35%, 50%, 100% * Group 2: Color, ML, 35%, 100% * Group 3: ML, 5%, 15%, 35%, 50%, 100% * Group 4: ML, 5%, 15%, 100% * Group 5: ML, 15%, 100% * Group 6: 5%, 15%, 35%, 50%, 100% * Group 7: 15%, 100% * Group 8: 15% - 50% * Group 9: 100% Only * Group 10: Color, 100% * Group 11: 100%, Color * Group 12: Color, 50% * Group 13: 50%, Color Option 2 = Secondary color choice After entering option two mode, the light will flash each color 8 times, then move to the next color. To select a color, release the switch while the light is flashing the desired color. Option 3 = Memory on/off After entering option 3 mode, the light will quickly flash red then quickly flash green. Release the switch while flashing red to select memory off and green to select memory on. Option 4 = Strobe option After entering option 3 mode, the light will flash each color several times. Toi select a strobe mode, release the switch while flashing the desired color Red = off Green = standard strobe Blue = bicycle mode To access strobe modes, half press the switch rapidly three times while in normal use.