Accessory Drive Belt 8-Rib 63 in - Volvo D13 / Mack MP8 Serpentine - Gates K080630 8PK1600 FP-900-03-1826

Get the accessory drive quiet and charging again with this 8-Rib Serpentine Accessory Drive Belt from FleetPro Parts & Tires. It is a 63 in belt in the metric 8PK1600 size, built for Volvo D13 and related engines, and it transfers crankshaft power to the alternator, A/C compressor and the other front-end accessories. A glazed, cracked or stretched belt causes squealing, charging problems and loss of A/C, so a fresh EPDM belt restores quiet, reliable accessory drive. We stock these heavily right here in our Hanover Park, Illinois warehouse to ensure lightning-fast shipping for fleets, diesel repair shops, and owner-operators nationwide. Correct Profile, Correct Length: The 8PK1600 Advantage A serpentine belt only works when the rib count, the profile and the length are all right. This one is a Micro-V (PK section) belt with 8 ribs and a 1.087 in top width, an effective length of 63.04 in (1600 mm) and a 63.61 in outside circumference. Those are the numbers that decide whether the belt sits square in every pulley groove and whether the automatic tensioner lands in the middle of its travel instead of at the end of it. The EPDM construction and the correct 8-rib profile are what bring the drive back to quiet, reliable operation after a glazed or stretched belt has been slipping. At FleetPro Parts & Tires, we would rather you replace a belt on a schedule than on a shoulder, because a belt is one of the cheapest parts on the accessory drive and one of the few that strands the truck outright. This belt is a direct replacement for highly searched industry numbers including Gates K080630 and K080630HD, Dayco 5080630, Continental 4080630 and Bando 8PK1600. Vehicle Fitment & Compatibility This serpentine accessory drive belt is intended for the following commercial applications: Engine: Volvo D13 and Mack MP8 Volvo: VNL, VNM and VHD (2007-2019) Mack: CXU, Pinnacle and Anthem Routing: Around the crankshaft, alternator and A/C compressor pulleys on the engine accessory drive Tensioning: By the automatic belt tensioner Direct Replacement & Cross-Reference Numbers: This serpentine belt serves as a direct replacement for the following part numbers: Gates Interchange: K080630, K080630HD Dayco Interchange: 5080630 Continental Interchange: 4080630 Bando Interchange: 8PK1600 FleetPro Part #: FP-900-03-1826 Technical Specifications Component Type: Micro-V (PK Section) Serpentine Accessory Drive Belt Ribs: 8 Metric Size: 8PK1600 Effective Length: 63.04 in (1600 mm) Outside Circumference: 63.61 in Top Width: 1.087 in Material: EPDM Condition: New Warranty: 1-Year FleetPro Warranty Brand: FleetPro (Distributed by FleetPro Parts & Tires)