PLA Carbon Fiber Variety Pack (4x200g) - 1.75MM

AMOLEN PLA Carbon Fiber Variety Pack loads four 200g spools into one order — two color bundles covering eight distinct CF colorways. PLA-CF contains 15% carbon fiber by weight, making it lighter and significantly stiffer than standard PLA with reduced warp on longer parts. The surface finish is matte and fibrous — not smooth or shiny. A hardened steel nozzle is required; carbon fiber is highly abrasive and will wear brass nozzles quickly. PLA-CF is not electrically conductive — if you need conductivity, see AMOLEN Conductive PLA. Bundle A — Black/Dark Grey/Sapphire Blue/Burgundy Red Deep, serious tones with a consistent CF matte texture across all four spools — practical engineering colors for structural and functional prints. Bundle B — Green/Brown/Light Grey/Aquamarine Blue Earthy and cool-toned spread — warm green, rich brown, neutral light grey, and cool aquamarine — covering the natural and cool ends of the spectrum in CF matte. Print Specifications Print Temperature: 190–220°C Bed Temperature: 0–60°C Layer Height: ≥0.15mm recommended Drying: 55±5°C for 6–8 hours Material: PLA with 15% carbon fiber; matte finish; not electrically conductive; not biodegradable; hardened steel nozzle required; reusable vacuum-sealed bags included 🌵 Why Buy from VectorDesignsArizona? We run a large and growing 3D print farm out of Tucson, Arizona — and the filaments we carry are the ones loaded in our own machines. As an authorized reseller, we only sell what we've personally used and relied on. Every material in our store has been tested in real production runs, not just sampled. When we recommend a filament, it's not a sales pitch, it's what's actually running through our printers right now.